I don't see the point in disabling it, everyone in the car should have a belt on or put bags on the floor.
Not sure if posted before (I did do bit of a search first) but this is how you can disable the seat belt warning chimes.
1. Ignition on (not started)
2. Insert and releaseseatbelt9 times...then you will hear a single chime to indicate its disabled.
Job done
Sorry if its a safety feature but it annoys me, cheers.
2007 D3 SE 4.0l
I don't see the point in disabling it, everyone in the car should have a belt on or put bags on the floor.
MY08 TDV6 SE D3- permagrin ooh yeah
2004 Jayco Freedom tin tent
1998 Triumph Daytona T595
1974 VW Kombi bus
1958 Holden FC special sedan
That was the first thing I did on my RRS when I got it - that chime is very annoying. The seat belt light on the dash remains which is fine.
I just wish there was a similar fix for the key in ignition, drivers door open chime.
REMLR 243
2007 Range Rover Sport TDV6
1977 FC 101
1976 Jaguar XJ12C
1973 Haflinger AP700
1971 Jaguar V12 E-Type Series 3 Roadster
1957 Series 1 88"
1957 Series 1 88" Station Wagon
REMLR 243
2007 Range Rover Sport TDV6
1977 FC 101
1976 Jaguar XJ12C
1973 Haflinger AP700
1971 Jaguar V12 E-Type Series 3 Roadster
1957 Series 1 88"
1957 Series 1 88" Station Wagon
MY14 D4, I turned off the seat belt chime in the CCF via my Nanocom. The light remains on the dash which is fine by me.
Just did it and it worked like a chime...
I had tried previously unsuccessfully but worked this time round, thanks for the suggestion...
Land Rover
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks