Thread: Starting 2011 LR4 build

Originally Posted by drivesafe

Hi Squigs, not sure if this helps but a month or so back, I was after engine oil for my RR and went to my local Supercheap Auto store and was trying to see which oil I needed.

An assistant ask could he help me, and I told what I was after.

He ask what engine I had in the RR and not being sure ( I wouldn’t have a clue ) he then suggested he could get the correct info.

He asked for my rego number and pumped it into the computer and he had all the info needed for the correct oil.

As above this might help you.

You can go online supercheap, punch your rego in and it will tell you what oil is suitable. No need to go to the store.

My advice is to stick to an oil that meets the Ford specification. That includes a couple of the Penrite Supercheap sells as do others. The manual has the correct oil spec to use, likely M2C913B/C but do check.

Originally Posted by squigs83

So looking at oils for the engine, diffs and transfer. What is everyone using and should I go with the 5w-40 for the engine or 10w-40 becuase I am in a very hot part of Oz?

I’d suggest only using 5W-30 that meets WSS-M2C913-B or C.

I use Castrol Magnatec Stop-Start 5W-30 A5 in mine MAGNATEC STOP START 5W-30 A5 | Castrol MAGNATEC - Car Engine Oil | Castrol Australia | Castrol MAGNATEC Engine Oil | Castrol™ Australia | Castrol Car Engine Oils | Edge, Magnatec and GTX ranges | Engine Oil | Castrol Australia | Castrol™ Engine Oil & Lubricants - Castrol™ Australia Note there are several Magnatec 5W-30 oils, but only the A5 version meets the WSS-M2C913 spec.

Originally Posted by theelms66

You can go online supercheap, punch your rego in and it will tell you what oil is suitable. No need to go to the store.

Interesting this.
I put in my rego, and it told me the right vehicle and engine (V6 petrol)
then it showed me the diesel engine oils for my engine!!!!!!!!!!!
Tread carefully using this tool!

Originally Posted by Aussie Jeepster

Interesting this.
I put in my rego, and it told me the right vehicle and engine (V6 petrol)
then it showed me the diesel engine oils for my engine!!!!!!!!!!!
Tread carefully using this tool!

Diesel oils work great in Petrol engines..

Originally Posted by Tombie

Diesel oils work great in Petrol engines..

Really!!??
I thought they had different levels of detergents - but maybe i'm wrong, and maybe thats a good thing.
Dont want to hijack the thread, but would love to know more.
Alan

Originally Posted by DiscoJeffster

My advice is to stick to an oil that meets the Ford specification. That includes a couple of the Penrite Supercheap sells as do others. The manual has the correct oil spec to use, likely M2C913B/C but do check.

+1 on that front. Penrite 5W30 C4 or C1 for me (non DPF). Change the grade at your peril. These engines are close toleranced and work hard,, they need thin oil at startup, especially the turbo bearings and top end.

Originally Posted by Aussie Jeepster

Really!!??
I thought they had different levels of detergents - but maybe i'm wrong, and maybe thats a good thing.
Dont want to hijack the thread, but would love to know more.
Alan

Correct. Higher detergent levels.
Our fleet boys also run the same oils across their Petrol and Diesel engines.