Quote:
Originally Posted by DiscoDB
Polished the headlight covers?
Printable View
Quote:
Originally Posted by DiscoDB
Polished the headlight covers?
...close....but bit more to it.
https://uploads.tapatalk-cdn.com/202...c5b9ba8e34.jpg
Nope, the before and after looks the same to me - what is the change?
They are all after photo’s - but it is a subtle change.
Here is a comparison with a stock photo.
https://uploads.tapatalk-cdn.com/202...b63ce266ca.jpg
Added some window tint over the lower section to cover up the silver blank spot below the main lamp and also covered the parking light which changes the look of the lights.
Another photo from the front.
https://uploads.tapatalk-cdn.com/202...2d149cb6e7.jpg
I think it's more impressive that your 10 yr old car looks cleaner then the brand new one. Well done
That must be the trick of using eye makeup.....[emoji106]Quote:
Originally Posted by josh.huber
Tesetd out my aftermarket AVN-6000 GPS today and it seems to be working after having a car sound place look at it yesterday, it hasn't been quite right since I had the torque converter done, I suspect it was too long off the battery. They managed to reset it somehow, not the factory reset though as the saved addresses are still in there and didn't even charge me anything! Was going to cost $110 to remove and a further $220 for send away inspection, but it seems they are uneconomical to repair now, with the motherboard costing $1000!
Akebono pads are 2500ks old, no noise, no dust (not that I care) ordered new rear rotors from the local bloke today, have a set of akebono to go on rears aswell.
The lca bushes are making lots of sounds, so are the sway bar links.. it never ends!!
Oh bought a second hand bull bar, need to pick a winch, will probably follow Scott and go a carbon winch. I love their warranty terms, for the amount of use it'll get I am still debating about a Kings dominator as it's half the price. I need to look more closely into the bar install first.. clips and bolts required for assembly before I worry about the winch
New rear rotors RDA slotted and akebono pads. Did the usual epb maintenance.. all good there. Pushed brake fluid through, as I do every set of pads. Bed in and test drive all good..
LCA bushes to be done this Thursday night, cut out and press in.