What happened to your D3/D4 today?

Quote:

---

Originally Posted by imaz

So I’m getting carried away with the lights, at least it’s purposeful. Light it up! Can actually see what’s in the drawer, fridge, and when hooking up the camper trailer in the dark..

Best of all, the cob are almost non existent to the trim.

https://uploads.tapatalk-cdn.com/202...94245977d8.jpg
https://uploads.tapatalk-cdn.com/202...9944bc2b39.jpg
https://uploads.tapatalk-cdn.com/202...5f7dd632e8.jpg

---

That’s a very healthy picnic you’ve got in the drawer.

New aircon compressor installed. Nice to have aircon working properly again.

DPL chip remap with EGR blanked. Raining here yesterday so haven't had the opportunity to see how it goes but there is certainly a noticeable difference in response and power. Very happy.

Martin

Quote:

---

Originally Posted by DiscoJeffster

I’ve done 10,000km on the Akebono and RDA disc combination and they’ve been excellent. Pads are very rotor friendly, next to no dust and the pulsing issue I had is gone and hasn’t returned.

---

Do you need to change the rotors with the Akebono ceramic pads or will they work on standard LR rotors?

What have you fitted? Love to know more - looks great!

Quote:

---

Originally Posted by imaz

So I’m getting carried away with the lights, at least it’s purposeful. Light it up! Can actually see what’s in the drawer, fridge, and when hooking up the camper trailer in the dark..

Best of all, the cob are almost non existent to the trim.


https://uploads.tapatalk-cdn.com/202...9944bc2b39.jpg

---

Quote:

---

Originally Posted by imaz

Best of all, the cob are almost non existent to the trim.

---

Looks great, plenty of light where you need it.
Do you have a link to the COB LEDs you used?

Quote:

---

Originally Posted by Tankmat

Looks great, plenty of light where you need it.
Do you have a link to the COB LEDs you used?

---

I used these from fleabay. Think I paid $2 for x10 with those discount codes.

10X 12V Waterproof White DRL LED Strip Lights Bars Camping Caravan Boat Car COB | eBay


The only trim I needed to take off was the dome Center light trim panel and the adjacent one on the door - to fish the wire through the grommets. For the rest, just tuck the wires in between the glass/trim panels.

1 light is enough. My camper trailer uses these same lights for the cabinets from factory so must be ok.

https://uploads.tapatalk-cdn.com/202...f3b6d56e9b.jpg

https://uploads.tapatalk-cdn.com/202...8d3dfa69ea.jpg

As you know I’m afraid of the dark.

Stedi? No, but they’re brighter. Have had these for a while now and I’m impressed with the build and longevity of them. Changed out the 15 or so incandescent over to these. Approx $10 pack of 10


https://www.aliexpress.com/snapshot/0.html'spm=a2g0s.9042647.6.2.69c64c4dB9ny5h&orderI d=8120891859539439&productId=32827007243


https://uploads.tapatalk-cdn.com/202...65fbeae881.jpg

https://uploads.tapatalk-cdn.com/202...e4e599226f.jpg

Quote:

---

Originally Posted by imaz

I used these from fleabay. Think I paid $2 for x10 with those discount codes.

10X 12V Waterproof White DRL LED Strip Lights Bars Camping Caravan Boat Car COB | eBay


The only trim I needed to take off was the dome Center light trim panel and the adjacent one on the door - to fish the wire through the grommets. For the rest, just tuck the wires in between the glass/trim panels.

1 light is enough. My camper trailer uses these same lights for the cabinets from factory so must be ok.

https://uploads.tapatalk-cdn.com/202...f3b6d56e9b.jpg

https://uploads.tapatalk-cdn.com/202...8d3dfa69ea.jpg

---

Only 1 install issue there [emoji41]
Where you put the switch is where the cargo cover mounts when put in the rear position!

And if You pull the blind back and clip it in from std it’s likely to flick that switch on.

Quote:

---

Originally Posted by imaz

As you know I’m afraid of the dark.

Stedi? No, but they’re brighter. Have had these for a while now and I’m impressed with the build and longevity of them. Changed out the 15 or so incandescent over to these. Approx $10 pack of 10


https://www.aliexpress.com/snapshot/0.html'spm=a2g0s.9042647.6.2.69c64c4dB9ny5h&orderI d=8120891859539439&productId=32827007243

---

They look good - I'm not very familiar with these but is it easy to change over from the originals? Is much soldering required?

Cheers

Quote:

---

Originally Posted by Tombie

Only 1 install issue there [emoji41]
Where you put the switch is where the cargo cover mounts when put in the rear position!

And if You pull the blind back and clip it in from std it’s likely to flick that switch on.

---

I bought the car used, and did not get the rear covers :)

Its a bus with the 6th seat used, so will never have a cover I guess.