Thread: What happened to your D3/D4 today?

Originally Posted by shamirj

Bought off ebay $45 pair delivered. new canvas bags pair of, to suit my own drawers

1 pair of canvas bags as they come perfect fit for my drawers
2 fitted one for the left drawer and...
3 one for the right side drawer

Not completely happy with the stuff inside the bags just threw in what was actually in the drawers that fitted but need to better organise my gear. Very happy with the price and quality with large zippers and see through means i know exactly and easily whats inside each bag. Did look into drifta canvas bags but the price was a factor.

Also a very good size to fit in the two top bins either side of 6&7 seats

This size is way too big for that area bit i did buy the smaller size for the cargo storage compartments on top, see pics

Originally Posted by shamirj

This size is way too big for that area bit i did buy the smaller size for the cargo storage compartments on top, see pics

You are right of course - didn't realize there were multiple sizes

Sunday brake job. Front rotors pads and caliper slide regreased, fluid flush. RDA rotors, TRW pads, Bosch fluid, Bendix grease. I'll need to do the rubbers next set of pads. They're starting to get a bit ****ty. Cheap enough on eBay with slide pins but. The rubber on the end of the slide pin is starting to "grow" and was causing them to be a bit stiff. The new grease has them sorted till next pads.


Also I found this end cap in my shed. Didn't use it on my compressor rebuild. It's X8R or whatever he calls himself brand. Free to good home. PM your address and pay postage. I've never used it my standard one was fine at rebuild.

Originally Posted by josh.huber

Sunday brake job. Front rotors pads and caliper slide regreased, fluid flush. RDA rotors, TRW pads, Bosch fluid, Bendix grease. I'll need to do the rubbers next set of pads. They're starting to get a bit ****ty. Cheap enough on eBay with slide pins but. The rubber on the end of the slide pin is starting to "grow" and was causing them to be a bit stiff. The new grease has them sorted till next pads.


Also I found this end cap in my shed. Didn't use it on my compressor rebuild. It's X8R or whatever he calls himself brand. Free to good home. PM your address and pay postage. I've never used it my standard one was fine at rebuild.

My D3 parted company with its High Level Stop Lamp Assembly, it had only been on there a year and now lies in bits. The windscreen guy obviously used a useless activator as there was no adhesive still attached to the assembly. Another $225 wasted. Nick

Installed one LED and waiting for dark to compare to the original halogen...

Originally Posted by Pippin

My D3 parted company with its High Level Stop Lamp Assembly, it had only been on there a year and now lies in bits. The windscreen guy obviously used a useless activator as there was no adhesive still attached to the assembly. Another $225 wasted. Nick

This can only be done by a windscreen installation company. Getting the glue right is a tricky job