Thread: What happened to your D3/D4 today?

Originally Posted by gavinwibrow

Good thinking and extremely interested in the comparison/outcome!

Not conclusive due to the surroundings. Definitely more light on the LED (left) and whiter as I drove around trying to find somewhere with no street lights.
Those fill in lights really light up the possums in the trees.

Stedi offer a 30 day change of mind return so I'll run them for a while.

Low beam.jpgHigh beam LED left.jpg

I have a Lux meter. I’ll take some readings when I get a change with a set here...

Remember glare doesn’t mean bright, it may appear so but won’t have the depth needed. Keep that in mind when assessing how they’re going.

Not my Disco, but I notice the Nov Dec 2019 issue of PAt Callinan's 4x4 Adventures has the temerity to show a D4 in a workshop and on the back of a tilt truck, no reason given of course.

I prefer the light of the original (rhs) to the LED and the spread is better on low.

Hi my disco today put another wing mirror switch on ,still the mirrors only work one way will go down but not up exchanged switch was a unit from wreckers ,tried cleaning switch itself the cir board looked about the same condition as my original one expected weak points in the ribbon on the back of the board ,any ideas got me stumped , all went belly up when we put clearview mirrors on open the drivers door the mirror moves itself ,tried original mirrors the same ,thought I had fold back mirrors tried switch in middle pos and pressed down ,since then mirrors will go down but push button up they still go down weird I know 599681DD-2582-47F9-B0C5-3B3754BA1E14.jpg

Originally Posted by RANDLOVER

Not my Disco, but I notice the Nov Dec 2019 issue of PAt Callinan's 4x4 Adventures has the temerity to show a D4 in a workshop and on the back of a tilt truck, no reason given of course.

Could have been mine😆

Originally Posted by loanrangie

I prefer the light of the original (rhs) to the LED and the spread is better on low.

Which bulb was replaced?

If it’s the infill then the low is factory...

Originally Posted by Tombie

Which bulb was replaced?

If it’s the infill then the low is factory...

the left is the new LED in the in fill high beam lamp.