Thread: What happened to your D3/D4 today?

Originally Posted by loanrangie

Mine is in the left rear storage compartment, i have rear AC so space is tight but still enough room for it and my LED trailer module.

I like this idea and I'll see if I have space in that storage sport.
(Sorry for late reply, kids and a lot going on ATM)

Originally Posted by glenn20869

I carried my old Bushranger branded Maxair compressor around in its carry bag for years but decided on a whim to put it in the ABS box. Ended up mounting the compressor using its original rubber mounts on a couple of 40mm square tube sections screwed onto a 12mm plywood base which was profiled to fit around the electrical connection boxes on the floor in that area. The plywood base was screwed down using two existing threaded holes. I even went as far as to wire in a bluetooth remote start/stop switch so I can stop/start the compressor from the back of the car when checking pressures during inflation.
I've yet to have the compressor trip out on over temp when needing to pump up the 4 tyres from as low as 10psi but then again they're not 35inchers so it's not needing to run very long. Attachment 191804

This is very useful to know - considering installing in this spot, my main concern was the heat in the engine bay. I might put the compressor here (or in the rear storage).
The plywood base makes sense, so I have this in mind for my install - and the bluetooth switch is a nice touch!
you again for this detailed input!
Rich

Originally Posted by discomatt69

Have a very close look at the rust that is starting and get onto that as part of the job or in 13 years the roof will be pealing off

Update: no pics sorry.

We stripped the rust and surrounding paint off today.
Etch primed and then seam sealed the area.

Paint is going down shortly.

I took the D3, rear, doggie seat cover out yesterday, as I had to carry a rear passenger.

Put Henry the Dog in the back today, sans cover and he had a monster regurg, on the way home from town.

I'm still trying to get the little breather holes in the leather clean.

Originally Posted by Saitch

I took the D3, rear, doggie seat cover out yesterday, as I had to carry a rear passenger.

Put Henry the Dog in the back today, sans cover and he had a monster regurg, on the way home from town.

I'm still trying to get the little breather holes in the leather clean.

Beware also of transporting a friend after recent prostate operation

Roof sorted

Originally Posted by DieselLSE

Installed a Camping Mode Switch that intercepts the Door Ajar signal from the Rear Right Hand Door. This allows me to open doors when camping without setting off the pre-ignition program.
The switch is just a latching switch that is normally set to "On" so that the door operates normally. When switched to "Off", it sends a "Rear RH Door Ajar" signal to the Body Control Module so that the opening of any door does not set off the pre-ignition cycle.
The wire to intercept is PLG (Pink with a Light Green trace).
The graphic on the switch is meant to represent a tent!

This turns out to be one of the best mods I've done to the car. Since July, I've done a Simpson double crossing and a number of other camping trips. If I had to buy another D4 or new Defender, this would be one of the first mods I'd do. Anyway, I've written up what I did and the mods may consider adding it to the D3/4 sticky.

Quick weekend away to Yunta for their Christmas Shoot.

Great light and sound show Friday night as a storm passed over slowly for 6 hours!

Took the hybrid, 13.8l/100km at 105km/h for the trip.

620km added to the odometer without issue.