2.7TD Engine oil cooler replacement

Quote:

---

Originally Posted by Pippin

Where is the best supplier for the cooler?

---

I ordered from Island 4x4 in the UK, seemed to be the beat price for cooler filter and gasket Gen LR

Quote:

---

Originally Posted by River

A note of thanks Shane, undertook this last week, Videos help greatly!

---

No broken fuel connectors?

😁 thankfully no. forewarned went slowly slowly with everything crossed

Quote:

---

Originally Posted by PerthDisco

No broken fuel connectors?

---

I think I just got unlucky[bigsmile]

Very helpful videos Shane and at least the cooler positioning isn't as bad as a Freelander V6's, in the valley of the vee covered in cooling water, like an Opel/ Holden/ Vauxhall 3.2 L V6!

Did this crappy job yesterday!
All went according to plan except I have a bunch of brittle connectors and a broken fuel QD.

The connectors are an easy fix, I'll buy some harness wrap and wrap them. Mainly it was the connector shells so, the conductors are ok.

The fuel QD is a bugger. The blue lock tab just crumbled. It was the first one I disconnected as it's the front one on the oil cooler!
Next to no chance getting one today, being Sunday!
Oh well. It's a waiting game now.

Cheers
RJ

Hey mate, I've got a set of fuel disconnect here, I bought them to build a fuel pressure tester for my nephew's car, but his new pump turned up first.
Happy to help out and send them up if you need them. If it's just the blue lock tab get the biggest zip tie that fits in the slot and pass it through the connector. Pm if you want my number. The electrical connectors are easy to come by too.. My rail pressure sensor did the same when I did my manifold

Quote:

---

Originally Posted by josh.huber

If it's just the blue lock tab get the biggest zip tie that fits in the slot and pass it through the connector. Pm if you want my number. The electrical connectors are easy to come by too.. My rail pressure sensor did the same when I did my manifold

---

Hi, Just the blue lock tab. If I can't get a replacement in a day or so, I'll try the cable tie! I hadn't thought about that, but in theory, it should work!

Quote:

---

Originally Posted by josh.huber

Hey mate, I've got a set of fuel disconnect here, I bought them to build a fuel pressure tester for my nephew's car, but his new pump turned up first.
Happy to help out and send them up if you need them. If it's just the blue lock tab get the biggest zip tie that fits in the slot and pass it through the connector. Pm if you want my number. The electrical connectors are easy to come by too.. My rail pressure sensor did the same when I did my manifold

---

Can you please post where you get these QD from as you can’t buy individually from LR Shane found out.

I’m rebuilding an 89 325is BMW and every electrical plug on the engine below manifold height disintegrates on touch. All plugs can still be bought new fortunately so getting some great practice for the Disco when time comes.

Quote:

---

Originally Posted by PerthDisco

Can you please post where you get these QD from as you can’t buy individually from LR Shane found out.

I’m rebuilding an 89 325is BMW and every electrical plug on the engine below manifold height disintegrates on touch. All plugs can still be bought new fortunately so getting some great practice for the Disco when time comes.

---

Mate I just got my disconnects from eBay. The basic type come in 2 sizes 8mm or 10mm there are some extra weird ones out there but they all seem easy to find.