Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 37

Thread: Tailgate release switch failure, replacement options?

  1. 6th July 2025, 12:41 PM #21
    PerthDisco's Avatar
    PerthDisco
    PerthDisco is offline ChatterBox Subscriber
    Join Date
    Oct 2012
    Location
    Perth
    Posts
    2,700
    Total Downloaded
    0
    Quote Originally Posted by BradC View Post
    I did that once using 24 Hr Araldite and all the correct prep. I also post-cured it in the oven when the wife was at work. I installed it with nickel anti-seize on the bolts and nuts and last time I had to take it off it was a doddle.

    The rubber on mine is cracking again, so I know it'll need doing soon(ish) and as I sold my last spare to a member here I picked one up from Aliexpress. If it lasts as long as the previous one I'm not doing so badly.

    While I have the handle off, I have a wider view rear-view camera to install that'll give me a view of the towball when backing up to the van. Win-Win.
    Yes you sold it to me but I’ve had to do it again since as somehow I pinched the wire on reinstalling and it chaffed and wires were too short to cut and join.

    This guy is based locally in WA I think

    https://ebay.us/m/ga8sUg
    Reply With Quote Reply With Quote
  2. 6th July 2025, 01:26 PM #22
    RANDLOVER's Avatar
    RANDLOVER
    RANDLOVER is online now ForumSage Supporter
    Join Date
    Jan 2010
    Location
    Brisbane
    Posts
    5,143
    Total Downloaded
    0
    Quote Originally Posted by BradC View Post
    I did that once using 24 Hr Araldite and all the correct prep. I also post-cured it in the oven when the wife was at work.....
    I think the correct preparation involves cleaning it in the dishwasher.
    2005 D3 TDV6 Present
    1999 D2 TD5 Gone
    Reply With Quote Reply With Quote
  3. 6th July 2025, 02:34 PM #23
    PerthDisco's Avatar
    PerthDisco
    PerthDisco is offline ChatterBox Subscriber
    Join Date
    Oct 2012
    Location
    Perth
    Posts
    2,700
    Total Downloaded
    0
    They are an excellent parts washer was used extensively on recent motorbike rebuild which wife allowed final assembly in living room

    Reply With Quote Reply With Quote
  4. 6th July 2025, 06:15 PM #24
    BradC
    BradC is online now Super Moderator
    No one of consequence     Supporter
    Join Date
    Mar 2018
    Location
    Perth (near Malaga)
    Posts
    3,546
    Total Downloaded
    0
    Showoff!

    We're about to do a reno and I joked about putting in a ramp so I could park my bike in the lounge room to work on it and the mrs nearly had kittens.
    MY08 D3 - The Antichrist - "Permagrimace". Turn the key and play the "will it get me home again" lottery.
    Reply With Quote Reply With Quote
  5. 6th July 2025, 08:20 PM #25
    DieselLSE's Avatar
    DieselLSE
    DieselLSE is offline Wizard Subscriber
    Join Date
    Nov 2015
    Location
    Black Rock
    Posts
    1,228
    Total Downloaded
    0
    Quote Originally Posted by PerthDisco View Post
    They are an excellent parts washer was used extensively on recent motorbike rebuild which wife allowed final assembly in living room

    That's sensational. Where can I get one as good as that?
    Wife, I mean.
    2013 D4 expedition equipped
    1966 Army workshop trailer
    (previously SII 2.25 swb, SIII 2.25 swb & lwb, P38 Vogue, 1993 LSE 3.9V8 then HS2.8)
    Reply With Quote Reply With Quote
  6. 8th July 2025, 12:18 PM #26
    Tombie's Avatar
    Tombie
    Tombie is offline OldBushie
    Join Date
    Apr 2012
    Location
    Whyalla, SA
    Posts
    7,545
    Total Downloaded
    0
    Quote Originally Posted by BradC View Post
    Showoff!

    We're about to do a reno and I joked about putting in a ramp so I could park my bike in the lounge room to work on it and the mrs nearly had kittens.
    Good grief man!!!!

    You want a Man cave at the opposite end of the premises…

    How the heck can a guy focus with “Housewife’s of…..” etc in the background Tailgate release switch failure, replacement options?
    Reply With Quote Reply With Quote
  7. 8th July 2025, 12:46 PM #27
    BradC
    BradC is online now Super Moderator
    No one of consequence     Supporter
    Join Date
    Mar 2018
    Location
    Perth (near Malaga)
    Posts
    3,546
    Total Downloaded
    0
    Quote Originally Posted by Tombie View Post
    Good grief man!!!!

    You want a Man cave at the opposite end of the premises…
    I have a granny flat, but it's full of machine tools and computers.

    Need a bigger block.
    MY08 D3 - The Antichrist - "Permagrimace". Turn the key and play the "will it get me home again" lottery.
    Reply With Quote Reply With Quote
  8. 8th July 2025, 01:10 PM #28
    PerthDisco's Avatar
    PerthDisco
    PerthDisco is offline ChatterBox Subscriber
    Join Date
    Oct 2012
    Location
    Perth
    Posts
    2,700
    Total Downloaded
    0

    Tailgate release switch failure, replacement options?

    Quote Originally Posted by BradC;[emoji639
    Tailgate release switch failure, replacement options?[emoji6Tailgate release switch failure, replacement options?Tailgate release switch failure, replacement options?][emoji[emoji6Tailgate release switch failure, replacement options?Tailgate release switch failure, replacement options?]Tailgate release switch failure, replacement options?[emoji6Tailgate release switch failure, replacement options?Tailgate release switch failure, replacement options?]][emoji[emoji6Tailgate release switch failure, replacement options?Tailgate release switch failure, replacement options?]Tailgate release switch failure, replacement options?[emoji6Tailgate release switch failure, replacement options?Tailgate release switch failure, replacement options?]]Tailgate release switch failure, replacement options?Tailgate release switch failure, replacement options?]I have a granny flat, but it's full of machine tools and computers.

    Need a bigger block.
    Me too but it has been converted from man cave to a proper bedroom now for eldest!

    You haven’t lived though until you’ve built an engine on the kitchen table. (Everything was immaculately clean by this stage).

    Reply With Quote Reply With Quote
  9. 8th July 2025, 04:30 PM #29
    BradC
    BradC is online now Super Moderator
    No one of consequence     Supporter
    Join Date
    Mar 2018
    Location
    Perth (near Malaga)
    Posts
    3,546
    Total Downloaded
    0
    Quote Originally Posted by PerthDisco View Post
    You haven’t lived though until you’ve built an engine on the kitchen table. (Everything was immaculately clean by this stage).
    I've done that twice (RZ350 & R6), but I was single both times
    MY08 D3 - The Antichrist - "Permagrimace". Turn the key and play the "will it get me home again" lottery.
    Reply With Quote Reply With Quote
  10. 11th July 2025, 09:20 PM #30
    discorevy
    discorevy is offline ChatterBox Subscriber
    Join Date
    Nov 2014
    Location
    Nirvana near Albany W.A.
    Posts
    2,480
    Total Downloaded
    0
    Quote Originally Posted by PerthDisco View Post
    They are an excellent parts washer was used extensively on recent motorbike rebuild which wife allowed final assembly in living room

    Great job, do you intend to get it dirty again ?
    Reply With Quote Reply With Quote
Page 3 of 4 FirstFirst 1234 LastLast
« I Suppose it Had to Come to This... | 2.7TD Engine oil cooler replacement »

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!