Reply With QuoteOriginally Posted by Piddler
SysAdmin (Owner)
Done in asa with a .6mm nozzle .3mm layer height, 4 shells vertical and horizontally
They are bigger than I originally thought they were
Will do another…
2007 Discovery 3 SE7 TDV6 2.7
2012 SZ Territory TX 2.7 TDCi
"Make the lie big, make it simple, keep saying it, and eventually they will believe it." -- a warning from Adolf Hitler
"If you don't have a sense of humour, you probably don't have any sense at all!" -- a wise observation by someone else
'If everyone colludes in believing that war is the norm, nobody will recognize the imperative of peace." -- Anne Deveson
“What you leave behind is not what is engraved in stone monuments, but what is woven into the lives of others.” - Pericles
"We can ignore reality, but we cannot ignore the consequences of ignoring reality.” – Ayn Rand
"The happiness of your life depends upon the quality of your thoughts." Marcus Aurelius
SysAdmin (Owner)
2007 Discovery 3 SE7 TDV6 2.7
2012 SZ Territory TX 2.7 TDCi
"Make the lie big, make it simple, keep saying it, and eventually they will believe it." -- a warning from Adolf Hitler
"If you don't have a sense of humour, you probably don't have any sense at all!" -- a wise observation by someone else
'If everyone colludes in believing that war is the norm, nobody will recognize the imperative of peace." -- Anne Deveson
“What you leave behind is not what is engraved in stone monuments, but what is woven into the lives of others.” - Pericles
"We can ignore reality, but we cannot ignore the consequences of ignoring reality.” – Ayn Rand
"The happiness of your life depends upon the quality of your thoughts." Marcus Aurelius
Master
in transit
not here yet unfortunately.
LordRover
SubscriberA new lesson learnt.Don't go out with a print running, or the filament will get pinched into the roll ( like a winch rope ) and the print will fail. Grrr
JayTee
Nullus Anxietus
Cancer is gender blind.
2000 D2 TD5 Auto: Tins
1994 D1 300TDi Manual: Dave
1980 SIII Petrol Tray: Doris
OKApotamus #74
Nanocom, D2 TD5 only.
TopicToaster
SubscriberWell that should be an anomaly not the norm. I don’t think it means you can’t ever go out - else will you never sleep or do one over 16 hours? After all, a 40 hour print is a long time. I had a power failure in the middle of one of mine - such is life
2010 TDV6 3.0L Discovery 4 HSE
2007 Audi RS4 (B7)
LordRover
SubscriberYeah, first time it's happened. One thing my printer alleges it can do is carry on after a power failure. Looking forward to testing that. Not.
JayTee
Nullus Anxietus
Cancer is gender blind.
2000 D2 TD5 Auto: Tins
1994 D1 300TDi Manual: Dave
1980 SIII Petrol Tray: Doris
OKApotamus #74
Nanocom, D2 TD5 only.
LordRover
SubscriberI had that yesterday, a small roll not on a spool got knotted and caused a couple of layers to stuff up and not enough left to finish the print.
New roll on its way for take 2.
MY08 TDV6 SE D3- permagrin ooh yeah
2004 Jayco Freedom tin tent
1998 Triumph Daytona T595
1974 VW Kombi bus
1958 Holden FC special sedan
LordRover
SubscriberAnyone got thoughts on the best filament to print those pesky D1/2 headlight clips? I've been doing a few using PLA, but i'm not sure of the suitability. So far I'm not impressed with the results I get from my printer with PET-G.
JayTee
Nullus Anxietus
Cancer is gender blind.
2000 D2 TD5 Auto: Tins
1994 D1 300TDi Manual: Dave
1980 SIII Petrol Tray: Doris
OKApotamus #74
Nanocom, D2 TD5 only.
I'm not sure if you found someone but I'm going to be producing some in high quality Nylon that will be an almost exact replica of YXX2777. They will be grey as standard but I also have SUA (saddle brown) and LUL (grey) paint available. Pm me if you're interested.
OldBushie
What’s your retraction settings?
And your heat settings?
Do you have a heated plate?
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks