BAS egr blank via gap tool

**loanrangie** · 11th October 2022, 02:24 PM

Originally Posted by twr7cx

It works well. But remember you need both sides - you need the physical blanking plates and to instal them and the software modification from BAS. Both our two MY12 D4 TDV6's have been running a BAS tune and EGR delete for 2 and 3 years respectively. Nil issues.

Or if your EGR's are still functioning you can just fit the plates like i did, will do a remap at some stage.

**Bulletman** · 11th October 2022, 02:50 PM

Originally Posted by loanrangie

Or if your EGR's are still functioning you can just fit the plates like i did, will do a remap at some stage.

I tried this and the car would just randomly fault . Sometimes would do it 5 times within a short distance and sometimes would go a whole day with nil faults. I can't remember the code as it was years ago but this was with the pipes blanked, butterfly removed and egrs functional.
Cheers Bulletman

**twr7cx** · 12th October 2022, 08:26 AM

Originally Posted by loanrangie

Or if your EGR's are still functioning you can just fit the plates like i did, will do a remap at some stage.

Depends on the vehicle. That is not true for the D4's, but might be so for earlier D3's...

**Pedro_The_Swift** · 12th October 2022, 09:13 AM

Originally Posted by eddy

A few years ago had a remap on my SDV6 and egr disconnect by Mark at Autocode in Welshpool.No problems after >50K.
Check them out ABOUT US | Auto Code | Vehicle Diagnostic Faults | ECU Remaps |

Wow, theres a whole page of car manufacturers symbols to click on, and they all work except---- yep. Land Rover.

**loanrangie** · 12th October 2022, 09:28 AM

Originally Posted by twr7cx

Depends on the vehicle. That is not true for the D4's, but might be so for earlier D3's...

Correct but op has a D3.... , works on my EURO4 D3.

**Falcon500** · 13th October 2022, 10:36 AM

Just out of curiosity - what build date is your vehicle? Mine is also a MY08 Euro4 (built Nov 2007) so wondering if i could get away without a tune.

Originally Posted by loanrangie

Correct but op has a D3.... , works on my EURO4 D3.

**loanrangie** · 13th October 2022, 10:55 AM

Originally Posted by Falcon500

Just out of curiosity - what build date is your vehicle? Mine is also a MY08 Euro4 (built Nov 2007) so wondering if i could get away without a tune.

May 07, i do get the occasional EGR fault in GAP but doesn't affect the running and doesn't put the engine fault light on.
I will get a remap once i get some other big items out of the way.

**BradC** · 13th October 2022, 11:45 AM

Originally Posted by loanrangie

May 07

Yowza! an MY08 built in the first half of the previous year? You must have one of the first off the line. What's your serial number?

Land Rover LR3 VIN Decoder | Lookup Land Rover LR3 VIN and Get History with Specs

Ours is a late 07 build MY08 serial 61674 and it got extremely unhappy blanking the EGRs without the patch.

**PerthDisco** · 13th October 2022, 12:36 PM

Mine Sep 07 build and needs patch to blank EGRs.

**loanrangie** · 13th October 2022, 02:11 PM

Originally Posted by PerthDisco

Mine Sep 07 build and needs patch to blank EGRs.

My egr valves are still working (po replaced them) and everything is still in place apart from the intake butterfly and just plates fitted between the valves and coolers.

Thread: BAS egr blank via gap tool

Thread Tools

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions