Results 1 to 10 of 10

Thread: 2.7l TDV6 EGR issues

  1. #1
    Join Date
    Apr 2023
    Location
    Germany
    Posts
    7
    Total Downloaded
    0

    2.7l TDV6 EGR issues

    Hi all,

    my Disco 3 2,7lD (2008) has got some issues with the EGR bank A.
    LIM mode and no way to delete it with the iCarsoft.
    It came back with an ADAC transport and now I have it at my workshop.

    Fist of all we found a little oxidation on the electrical plug on bank A,
    cleaned it and also checked the mechanical valve too.

    All seams fine but the fault came up again.

    Does someone have voltage values we can measure on pins?



    Best regards, Martin

  2. #2
    Join Date
    Apr 2023
    Location
    Germany
    Posts
    7
    Total Downloaded
    0
    after some researches, where I didn't get and information I checked my faulty one in my workshop

    it's from a LR 3, 2.7l 2008

    the connector has 5 pins,

    ° ° - - ( ) °

    small pins are the valve position sensor, which is a kind of an hall electronic

    + V ( ) - (5V) the voltage is :
    open valve 4.5 V,
    closed valve 0.8V

    - - selenoid,
    can be triggered with 12Vdc, polarity has to be changed for opening and closing

  3. #3
    Join Date
    Jan 1970
    Location
    St Helena,Melbourne
    Posts
    16,770
    Total Downloaded
    1.13 MB
    Not sure how strict your TUV inspection is nut may be best to replace the faulty egr or if possible blank them with a software patch.
    Last edited by loanrangie; 26th April 2023 at 06:16 AM.
    MY08 TDV6 SE D3- permagrin ooh yeah
    2004 Jayco Freedom tin tent
    1998 Triumph Daytona T595
    1974 VW Kombi bus
    1958 Holden FC special sedan

  4. #4
    Join Date
    Apr 2023
    Location
    Germany
    Posts
    7
    Total Downloaded
    0
    we already exchanged the faulty one, so I could check the one which was in the car

    It's a half day job doing it and also not quite cheap if you go for good ones.

    So I thought how can I make a tool for emulating them when I get stuck in the dessert without a workshop nearby.

  5. #5
    Join Date
    Jan 1970
    Location
    St Helena,Melbourne
    Posts
    16,770
    Total Downloaded
    1.13 MB
    Quote Originally Posted by martinf5 View Post
    we already exchanged the faulty one, so I could check the one which was in the car

    It's a half day job doing it and also not quite cheap if you go for good ones.

    So I thought how can I make a tool for emulating them when I get stuck in the dessert without a workshop nearby.
    Cheaper to have the software patch applied.
    MY08 TDV6 SE D3- permagrin ooh yeah
    2004 Jayco Freedom tin tent
    1998 Triumph Daytona T595
    1974 VW Kombi bus
    1958 Holden FC special sedan

  6. #6
    Join Date
    Apr 2023
    Location
    Germany
    Posts
    7
    Total Downloaded
    0
    Quote Originally Posted by loanrangie View Post
    Cheaper to have the software patch applied.
    where and how can this be done?

  7. #7
    Join Date
    Jan 1970
    Location
    St Helena,Melbourne
    Posts
    16,770
    Total Downloaded
    1.13 MB
    Quote Originally Posted by martinf5 View Post
    where and how can this be done?
    Lots of tuners in the UK can do it, Bell Auto Services for one.
    MY08 TDV6 SE D3- permagrin ooh yeah
    2004 Jayco Freedom tin tent
    1998 Triumph Daytona T595
    1974 VW Kombi bus
    1958 Holden FC special sedan

  8. #8
    Join Date
    Apr 2023
    Location
    Germany
    Posts
    7
    Total Downloaded
    0
    thanks,
    beging in Germany it's good idea for a holiday Tripp

  9. #9
    NavyDiver's Avatar
    NavyDiver is offline Very Very Lucky! Gold Subscriber
    Join Date
    Feb 2010
    Location
    Melbourne
    Posts
    10,247
    Total Downloaded
    0
    Quote Originally Posted by martinf5 View Post
    thanks,
    beging in Germany it's good idea for a holiday Tripp
    download online might be cheaper

  10. #10
    Join Date
    Apr 2023
    Location
    Germany
    Posts
    7
    Total Downloaded
    0
    well, probably, but I also need the GAP tool

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!