Alloy coolant outlet for TDV6

**Disco4TT3** · 15th July 2024, 09:36 AM

Mine arrived yesterday and looks good. Mating surfaces seem flat with no rough edges that I can see.

Getting prepped to do the swap and watched this great vid:
https://www.youtube.com/watch?v=Swv0YLL-rEU

Thanks D Landy

He suggests replacing the oring/seal on the oil cooler which connects into the water outlet pipe:

water pipe seal.jpg

The comment section mentions part# Lr013151 - but I think this is for the two seals on the water outlet itself (which came with the new part).

Googling suggest it may be this one:
ESR1594L

Can anyone confirm?

**Tombie** · 15th July 2024, 09:55 AM

It’s just a Viton O’ring.

Any hydraulic seal company / most bearing companies can supply.

**DiscoDB** · 15th July 2024, 12:54 PM

Viton BS211V o-ring.

(Credit to Tombie who posted it once before).

**Disco4TT3** · 15th July 2024, 05:09 PM

Thanks both! I swung past an LR dealer today and they gave me LR013151, so the comment in the vid was correct

**twr7cx** · 16th July 2024, 08:11 AM

Originally Posted by Disco4TT3

He suggests replacing the oring/seal on the oil cooler which connects into the water outlet pipe:

...

Googling suggest it may be this one:
ESR1594L

Can anyone confirm?

The part number is BS211 if I recall correctly. As Tombie stated, any bearing shop or the like should be able to supply.

**DiscoJeffster** · 4th August 2024, 05:21 PM

Installed my AliExpress jobbie plus a new top hose also from Ali ( more cuts so more cover trimming), new throttle body seals (also Ali) plus new coolant bottle, wait for it, also from Ali. All went in fine. Lost more than a litre in the process and topped up with distilled for now. Will get some LR coolant to top up (that’s what was put in by my Indy last time when they changed the EGRs and flushed it. All in all, went surprisingly well