-
13th May 2009, 10:38 AM
#1
TDV6 Oil confusion
I read somewhere that Castrol Edge 5W-30 is the way to go but having a look on the Castrol "lube reference guide" at Castrol Australia - NetLube I notice that they suggest 0W-40 for 2007 onwards and 5W-30 or 0W-40 for 2005-2006 models.
What changed in the engine between 06 and 07? And should I be using 0W-40 and not 5W-30 for my 07?
Also, I'm up in the tropics (Darwin) where its a lot hotter than the rest of oz... these recommendations I guess are based on the average user in oz which would be down south?
Any advice welcome
-
13th May 2009, 12:27 PM
#2
I've been going through this myself. I contacted Castrol after a while coz when i did the Castrol website thing, it told me to use 0W40 but the oil cap and the handbook says 5W-30.
this is what i got back: quote
"The preferred oil (a SAE 5W-30 viscosity grade oil called Castrol SLX Professional OE) is available, but comes only in a 20 litre pack minimum. If you need a smaller pack (eg. 5 litre), you may use the Castrol Edge Sport 0W-40 in the crankcase of this vehicle"
i'm in an 08 SE TDv6 so looks like i'll be getting the 20L pack sometime.
Eugene
-
13th May 2009, 07:49 PM
#3
I went chasing the spec given in the owners manual and was told it was only able to be sold to LR dealers, in the end I went with the 0w-40
Regards,
Tote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Search AULRO.com ONLY!
|
Search All the Web!
|
Bookmarks