Page 24 of 26 FirstFirst ... 142223242526 LastLast
Results 231 to 240 of 254

Thread: D4 high-beam alignment

  1. #231
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,030
    Total Downloaded
    0
    Not wanting to have the screws fall out and then perhaps not be able to get them back into place, I only loosened the screws enough to get about 2mm movement, which wasn't enough. I might have another go if 4mm does the trick.
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa

  2. #232
    Join Date
    Feb 2012
    Location
    Darwin
    Posts
    474
    Total Downloaded
    0
    Quote Originally Posted by discotwinturbo View Post
    Don't know mate. When I click on the pic it comes up full screen for me, both on the forum and on the forum runner app.

    Brett....
    FWIW - right click on pic and open in new tab gave me a large pic.

  3. #233
    Join Date
    May 2010
    Location
    Northern Beaches, Sydney
    Posts
    533
    Total Downloaded
    0
    Quote Originally Posted by trif View Post
    Pic of LED driving lights as requested. I have to start on the roof next .

    Regards Trif.
    They look impressive. Do they have much range or are they more of a spread beam?

    It's interesting that the new L405 RRV looks like going to have LED high beam lights. If correctly focused, they can be devastatingly bright. I have a LED Lenser X21 torch with 7 LEDs and it is brighter than most car lights.

  4. #234
    Join Date
    Jan 2011
    Location
    Newcastle
    Posts
    93
    Total Downloaded
    0
    Quote Originally Posted by d3syd View Post
    They look impressive. Do they have much range or are they more of a spread beam?

    It's interesting that the new L405 RRV looks like going to have LED high beam lights. If correctly focused, they can be devastatingly bright. I have a LED Lenser X21 torch with 7 LEDs and it is brighter than most car lights.
    They not only look impressive but function well, although they are a recent addition and haven't been tested fully offroad. Like you l was drawn to the LED concept by having a couple of LED hunting torches and knowing how good they are. The great whites are marketed as a compromise between distance and spread, and l would agree. By way of comparison to the Lenser X21, each light is rated at approx. 6400 lumens. I have them positioned slightly divergent from each other to increase the side vision but still having enough overlap centrally. They are also smaller diameter than the Lightforce genesis HIDs l was looking at, and the LED appearance fits in with the cars OEM LEDs and the OL bar LEDs. The light is whiter than the OEM bi-xenons, l believe around 6000K. The website has a series of photos comparing halogen, HID and the various LED combinations.

    Regards Trif.
    Last edited by trif; 13th May 2012 at 05:15 PM. Reason: typos

  5. #235
    Join Date
    Jan 1970
    Location
    Hobart D1 Sydney D4
    Posts
    80
    Total Downloaded
    0

    D4 High Beam

    I have a 2012 D4 with bi-xenon's which are possum spotters and am not happy like everybody else.
    I would be interested if there is anybody that has a D4 with bi-xenon's that does NOT have this issue or is it across the board?

    If so I will probably look at the LED D/L's in the near future.

    Cheers
    Mike L

  6. #236
    GrahamB Guest
    Two months without a post. What's going on? Has anyone tried the spacer fix suggested by RSAChris? I've lodged a complaint with Fair Trading so we'll see where that takes us.

  7. #237
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,030
    Total Downloaded
    0
    I was only thinking today that I haven't tried the spacers yet.
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa

  8. #238
    Join Date
    Apr 2008
    Location
    Brisbane,some of the time.
    Posts
    13,886
    Total Downloaded
    0
    I have the possum spotters as well

    But the low beam is very good.

    For driving in rural areas,something else is definitely needed.

    I recon the D2a had better lights

  9. #239
    Join Date
    Jan 2010
    Location
    Forster NSW
    Posts
    80
    Total Downloaded
    0
    The hot glue solution has let go on one side after 2 years or so. Taking the opportunity to switch to a warmer colour HID in the high beam "filler" pockets where the halogens were - have ordered 4300K 50W HIDs instead of the 6500K 35W fitted last time, to be held in place by some sort of silicon stuff instead of hot glue.

    Are the spacers readily available anywhere, or do they need to be fabricated? I couldn't find the post about those. Can you point me to it GrahamB?

  10. #240
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,030
    Total Downloaded
    0
    My globes with filed-down tabs don't require anything to hold them in place at an angle. However a tilted globe isn't nearly as good as a tilted reflector with a concentrated beam would be. If I can tilt the reflectors I'll definitely discard the driving lights to remove the air restriction although I'm inclined to do so for summer at least.
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa

Page 24 of 26 FirstFirst ... 142223242526 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!