Results 1 to 7 of 7

Thread: Diagnostic tool help, Gold Coast please

  1. #1
    Join Date
    Nov 2007
    Location
    Gold Coast
    Posts
    63
    Total Downloaded
    0

    Diagnostic tool help, Gold Coast please

    Well, it all comes at once!

    I'm hoping that someone can assist me with a diagnostic tool please. I'm on the Gold Coast, near Reedy Creek.

    I require someone to read a suspension fault, & gearbox fault. After some brief checking I suspect the steering angle sensor for the suspension, and a piston issue with the gearbox. A fault code or two would cut down my 'investigation' time!

    I have been looking at getting my own fault reader, but there is always something more urgent! Now theses problems have appeared & caught me out!

    I'm willing to bribe the lucky person with beer... :-)

    Any help appreciated.

    Cheers,

  2. #2
    Join Date
    Dec 2011
    Location
    Toowoomba
    Posts
    242
    Total Downloaded
    0
    If in Toowoomba-------------- I could help.
    However diagnostics will only pick up electrical faults ( solenoids and speed sensors) in gearbox; not pressure related problems; these you can only check pump output/operating pressure at one point.

  3. #3
    Join Date
    Nov 2007
    Location
    Gold Coast
    Posts
    63
    Total Downloaded
    0
    Quote Originally Posted by donrover0 View Post
    If in Toowoomba-------------- I could help.
    However diagnostics will only pick up electrical faults ( solenoids and speed sensors) in gearbox; not pressure related problems; these you can only check pump output/operating pressure at one point.
    Thank you for the offer, I think in reality the gearbox needs work done. I was hoping it was an electrical fault. Only 3rd giving me grief, with 4th flaring 100 revs.

    Time for a rebuild I think... It's the original, with no work done yet on 310,000 so shouldn't complain. Just bad timing!

    The suspensions fault can wait for now. Gearbox takes priority. Easter trip now canned.

  4. #4
    Join Date
    Dec 2009
    Location
    Tyrendarra Vic (South West Vic )
    Posts
    1,729
    Total Downloaded
    0
    What model please . But me thinks it may be time to get the auto looked at

  5. #5
    Join Date
    Nov 2007
    Location
    Gold Coast
    Posts
    63
    Total Downloaded
    0
    Quote Originally Posted by 33chinacars View Post
    What model please . But me thinks it may be time to get the auto looked at
    It's the TD6, I should have added that at the start.

    Yes, I agree, I will have to get me tools out!

  6. #6
    Join Date
    Dec 2009
    Location
    Tyrendarra Vic (South West Vic )
    Posts
    1,729
    Total Downloaded
    0
    Mine went at 140,000 kms . On the advice of another forum member on here I sent mine to Greame at Western Suberbs Automatics in Rocklea. Happy with service. Yet to refit , waiting on a couple of small parts from the UK

    310,000 is a good innings from a GM 5L40E in any bodies book.

  7. #7
    Join Date
    Nov 2007
    Location
    Gold Coast
    Posts
    63
    Total Downloaded
    0
    Quote Originally Posted by 33chinacars View Post
    Mine went at 140,000 kms . On the advice of another forum member on here I sent mine to Greame at Western Suberbs Automatics in Rocklea. Happy with service. Yet to refit , waiting on a couple of small parts from the UK

    310,000 is a good innings from a GM 5L40E in any bodies book.
    Your not wrong, it sure is a good run for the transmission.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!