Thread: 18 inch rims for an 08 Vogue TDV8

I think you'll find the D2 has a smaller centre hole (spigot) diameter. When one fits RRS/L322 rims onto a D2/P38A, one has to fit hubcentric rims because the wheels have a bigger hole than the D2/P38A

Will these do? http://www.aulro.com/afvb/wheels-tyr...ims-tyres.html

These are a bit far away, too: http://www.aulro.com/afvb/wheels-tyr...lloy-rims.html

Originally Posted by p38arover

I think you'll find the D2 has a smaller centre hole (spigot) diameter. When one fits RRS/L322 rims onto a D2/P38A, one has to fit hubcentric rims because the wheels have a bigger hole than the D2/P38A

Will these do? http://www.aulro.com/afvb/wheels-tyr...ims-tyres.html

These are a bit far away, too: http://www.aulro.com/afvb/wheels-tyr...lloy-rims.html

Thanks Ron for all that info .. it has been most helpful (including the links).

Kind regards
Steve

According to the LR parts catalogue only Style 2 18" rims (RRC503040MNH) will fit over the front brakes.

These ones?

I haven't actually tried any LR 18" rims. However, my understanding is that no LR 18" rim will fit over the front callipers of L322 tdv8. They will only fit 2002-2006 L322.

The only 18" rim to fit over the front callipers is a GOE or Compomotive rim from the UK. Google GOE or Green Oval Experience for info.

Otherwise it's a LR 19" rim.

Steve I have these 18s on my MY05.
You're welcome to try it on yours, but it's a long drive to Sunshine Coast.

Originally Posted by CBH25

Steve I have these 18s on my MY05.
You're welcome to try it on yours, but it's a long drive to Sunshine Coast.

Same offer if your in the bayside area one day...

Actually - Mr rar, you should try one on yours.

Originally Posted by harlie

Same offer if your in the bayside area one day...

Are your's 7.5" or 8" and are they RRC503040MNH?

Whilst the parts catalogue lists this part number as 18x8" and fits the 4.2 SC and 3.6 TDV8, there are many discrepancies on the net as to whether this part# is 7.5" or 8" and whether they do or do not fit over the 08/09 4-pot Brembos. According to the parts catalogue there is an earlier similar pattern 7.5" with a different part#.