AT RESTYes seems so, I was touring Portsea's Point Nepean road yesterday arvo admiring all the other passing Rangies ( they were newer models,Originally Posted by Homestar
Very true.. Looks like you've settled into L322 ownership just fine.
but the body shape is still similar
then passed a Breathalyzer, got a smile and waved on by the cops, didn't even need to stop , they seemed to be pulling toyotos up that day, i saw them on the way up and down and they had toyotas.
I later Parked in Blairgowrie motor yacht squadron's car part (on the public side of the controlled members boom gate) then took the leisurely cruise along Peninsula link home.
Major part of the heart and soul of AULRO.comHmm, SuperCrap have this one:
SCA Hydraulic Bottle Jack - 8000kg
Details
SCA Hydraulic Bottle Jack - 8000kg | Supercheap Auto
Item No. 382377
8000kg working load limit
height range: 238-478mm
Meets mandatory vehicle jack standard AS/NZS 2693:2007
Net weight: 6.65kg
Ron B.
VK2OTC
2003 L322 Range Rover Vogue 4.4 V8 Auto
2007 Yamaha XJR1300
Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA
RIP Bucko - Riding on Forever
Major part of the heart and soul of AULRO.comWait!
I bought one but haven't tried it under the L322, only on the bench. Unlike the P38A jack, it appears to have only a single ram and the extra height is gained via the screw section. When left screwed in, it pumps as high as the P38A jack.
I'll check it properly today and report back. It may be going back to SCA.
Ron B.
VK2OTC
2003 L322 Range Rover Vogue 4.4 V8 Auto
2007 Yamaha XJR1300
Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA
RIP Bucko - Riding on Forever
Master
Sounds like the first one I bought from Total Tools.... with the screw part being a key part of the height it just wouldn't raise the vehicle high enough.
AT RESTjust source a spinter jack you wont regret it
Major part of the heart and soul of AULRO.comI lowered the car to access height and the jack won't fit underneath. Oh, well, back to SuperCrap. I should have checked first.
Ron B.
VK2OTC
2003 L322 Range Rover Vogue 4.4 V8 Auto
2007 Yamaha XJR1300
Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA
RIP Bucko - Riding on Forever
AT RESTI am lead to believe the IVECO Daily jacks also are good.
AT RESTpic of using my sprinter jack I put a modified head on it to slot correctly into the sill recess. This pic is with a fully inflated tyre and the height th jack was to enable me to removed a fully imflated tyyre, . The Jack has that much travel again when the next section of ram comes out. I used it on a flat tyre on the road and can't remember if I raised the suspension to gain acccess under the sill, but it was not an real issue.
20190412_103534.jpg
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Reply With Quote
Bookmarks