Results 1 to 4 of 4

Thread: Intermittant Adaptive Dynamics Error

  1. 5th February 2019, 10:01 AM #1
    2nd Rower
    2nd Rower is offline Master
    Join Date
    Jun 2008
    Posts
    168
    Total Downloaded
    0

    Intermittant Adaptive Dynamics Error

    Must be the month....

    I'm now getting an intermittent Adaptive Dynamics Error. It clears on ignition cycle and doesn't occur every day, in fact is very infrequent.

    When it does occur the suspension seems to stiffen - just like when the Airbags are at their limit in extended mode - but whilst still in standard height mode, so you seem to bounce a bit more over road imperfections with less give in the ride.

    Any pointers to what may cause this and a fix?
    Reply With Quote Reply With Quote
  2. 5th February 2019, 12:18 PM #2
    Graeme
    Graeme is offline Swaggie Vendor
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,033
    Total Downloaded
    0
    A wire to the top of the front shocks will be broken. Its a known problem which can be temporarily repaired by rejoining the broken wires but best to acquire and fit the service kit of a replacement connector and lengths of better wires, 1 kit for each side front. When I find the part number I'll update this post.

    When one CVD isn't connected then all CVDs operate without any softening, hence the stiff ride.
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa
    Reply With Quote Reply With Quote
  3. 5th February 2019, 12:59 PM #3
    Graeme
    Graeme is offline Swaggie Vendor
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,033
    Total Downloaded
    0
    The repair kit part number is LR032839 - 2 will be required.

    You could replace the first 200mm or so of the wires, having cut the original wires close to the plug but leaving enough to solder new wires, assuming that the connectors can't readily be disassembled.
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa
    Reply With Quote Reply With Quote
  4. 7th February 2019, 07:03 AM #4
    2nd Rower
    2nd Rower is offline Master
    Join Date
    Jun 2008
    Posts
    168
    Total Downloaded
    0
    Thanks Graeme,

    One side already had the kit fitted the other side someone had previously just repaired with solder and this was intermittently breaking, so the kit was fitted here.
    Reply With Quote Reply With Quote
« Stripped sump plug thread M62 4.4 V8 | Poverty pack tdv8 dvd upgrade? »

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!