
 Originally Posted by 
DocDisco
					 
				 
				Is there any way to fit Rhinorack accessories to the Land Rover rack??
			
		 
	 
 <br>
<br>Hi DocDisco,<br><br>Apologies for the delay - haven't looked at email for a while.<br><br>I had similar questions about fitting accessories when I got mine but LR couldn't offer any info. I went with it under time pressure & figured that all racks are fairly similar when it comes to accepting accessories though the LR OEM rack did make me nervous.<br><br>As it turns out, it had similar set up as others I assume, with channels in each cross bar that will take a T-bolt with the threaded end facing up to receive a nut or into which you can drop a square nut and bolt into that. I had to fit a Thule Pod with the claws that secure by winding onto the cross bars and a 2.1m Rhino rack half width steel cage and both were no problem.<br><br>The cross members can be loosened off and slid forward or back to meet the claws of the pod.<br><br>I bought some standard Rola T-Bolts to fit the cage, using the metal plate and hand tighteners that come with the standard Rhino Rack U-Bolt set (pictured).<br><br><img src="https://i.ebayimg.com/thumbs/images/g/BeUAAOSwnvthUFPj/s-l200.jpg"><br><br>The only issue is getting your bolt length and bolt size to match when mixing and matching different fasteners but they all seem to be M6 or M8 from memory so stick to one. I had to go back & forward a few times to get the right fit so I would recommend taking your rack to the shop selling the fasteners to make it easier to to do in one go.
				
			 
			
		 
			
				
			
			
				Chieftain
Current - Discovery 19MY SD6 SE - Fuji White, Capability Plus
Sold - Discovery 4 MY12 SDV6 SE - Fuji White, E-diff
			
			
		 
	
Bookmarks