Thread: Won’t be retro...

Originally Posted by roverrescue

I was going to say
275/85 is a 9” side wall
If that is an 18” rim the sidewall would have to be half the height of the rim

275/35 would be 3.75” sidewall or 20% rim diameter
Which looks to match the picture by eyeball

Which also equals mall crawler rubber!

26” overall - same as the 20” rim in utah

Obviously 26” fits their blacktop targets nicely
If that be the case won’t be fitting 32” legally in Australia??

Steve, a 26" is what they put on little 3 series BMW's this will guaranteed not have any smaller than 31". It's what has gone on all the new full size vehicles since L405 was released. Based on the pics of defender testing 32" will be standard. One thing's for sure, drawing any conclusions from that Africa vehicle pic is not going to lead anywhere.

Ok guys, had a play on high res images heres what i found, I feel like more to be found.

Significant Bonnet bulge disguised by wrap, notice no washer jets

Front cooler vent section looks like fake add on paneling, real panel behind.

Dash HUD pod visible and vents, centre speaker, washers look to be on wipers comp truck style.

Huge mirror with indicator/warning light, camera.

Huge rear passenger door and all windows covered in wrap.

Very square rear with cool dual square stop lights.

Body sticks out from windows more than a khan defender guard widening pack.

Tube rock sliders seen on snow shots in 2 photos.

Something strange on brakes on brakes in snow shots.

No valves on tusk wheels.

18inch wheels

275/35/ZR18 95W BFG tyres

Front heavily disguised.

Originally Posted by roverrescue

I was going to say
275/85 is a 9” side wall
If that is an 18” rim the sidewall would have to be half the height of the rim

275/35 would be 3.75” sidewall or 20% rim diameter
Which looks to match the picture by eyeball

Which also equals mall crawler rubber!

26” overall - same as the 20” rim in utah

Obviously 26” fits their blacktop targets nicely
If that be the case won’t be fitting 32” legally in Australia??

Moab tyres are 32 inch, 34s legally in oz without engineering.

I was going to say
275/85 is a 9” side wall
If that is an 18” rim the sidewall would have to be half the height of the rim

275/35 would be 3.75” sidewall or 20% rim diameter
Which looks to match the picture by eyeball

Which also equals mall crawler rubber!

26” overall - s

Now that other photo on red dirt 20” rim
Is that the size in Utah? I read 255/60 R20
Which also is 26” (not sure where 32 came from)

Obviously 26” fits their blacktop targets nicely
If that be the case won’t be fitting 32” legally in Australia??

Originally Posted by roverrescue

I was going to say
275/85 is a 9” side wall
If that is an 18” rim the sidewall would have to be half the height of the rim

275/35 would be 3.75” sidewall or 20% rim diameter
Which looks to match the picture by eyeball

Which also equals mall crawler rubber!

26” overall - s

Now that other photo on red dirt 20” rim
Is that the size in Utah? I read 255/60 R20
Which also is 26” (not sure where 32 came from)

Obviously 26” fits their blacktop targets nicely
If that be the case won’t be fitting 32” legally in Australia??

Moab tyres are 32 inch, 34s legally in oz without engineering.

12 inch sidewall or 6 inch for half.

Switch to 18s and you get the following if you fit 33.7s.

15.8 inch sidewall or 7.9 inch for half.

Hahah
Yeah my bad
255/60R20
I forgot to add the other sidewall

So that is 30” nominal
Was there another Moab size somewhere?


So we assume the photo render is bogus 275/35R18

S

Aaaand I fail at maths

Agreed 32” nominal

🤦*♂️

Originally Posted by roverrescue

Aaaand I fail at maths

Agreed 32” nominal

🤦*♂️

make your life easier Steve:

Tire Size Calculator