Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: v8 on gas what oil?

  1. #1
    Join Date
    Jan 1970
    Location
    brisbane , QLD
    Posts
    65
    Total Downloaded
    0

    v8 on gas what oil?

    Hi Guys im about to get gas put on a 97 disco and want to do a oil change just before it goes in for the gas fitout do i use a different oil to before or do i use the same oil as i have been running?


    thanks
    jeff

  2. #2
    Join Date
    Jan 1970
    Location
    Adelaide - Torrens Park
    Posts
    7,291
    Total Downloaded
    0
    Any good oil of the appropriate grade will be fine.

    If you run on gas most of the time you will find your oil stays clean for longer.

  3. #3
    Join Date
    Jan 1970
    Location
    Daisy Hill Queensland
    Posts
    469
    Total Downloaded
    0
    IMHO yes use the oil you are currently using if you are happy with it, HOWEVER there are many on here that know oils a lot better than me. And there might be gas oils on the market.

    A car that runs on gas is generally cleaner than a petrol one so your oil won't get as dirty. I had a friend that had a tried L300 that tended to blow a little blue smoke, however after 12 months of running on gas, smoke had stopped and compression had lifted. We put it down to the engine running cleaner. Mind you we didn't strip the engine to check. To much of a bugger to get out.

    Danny
    :TakeABow:LAND ROVER

    Don't Follow Me, I'm in a "Land Rover", You WON'T make it.

    aut viam inveniam aut faciam

  4. #4
    Join Date
    May 2007
    Location
    Safety Bay
    Posts
    8,041
    Total Downloaded
    0
    I ran penrite Diesel light in mine regardless,as BigJon said it does stay cleaner. Pat

  5. #5
    Join Date
    Jul 2006
    Location
    East-South-East Girt-By-Sea
    Posts
    17,662
    Total Downloaded
    1.20 MB
    Quote Originally Posted by disco97 View Post
    Hi Guys im about to get gas put on a 97 disco and want to do a oil change just before it goes in for the gas fitout do i use a different oil to before or do i use the same oil as i have been running?


    thanks
    jeff
    I use Penrite HPR Gas on my 4.6, I did run HPR Gas 10 for a short time but wasn't sure that my oil pressures were any better when hot so went back to the HPR Gas, which is stocked more places.

    (I was running Penrite oils before the conversion.)

    You won't find me on: faceplant; Scipe; Infragam; LumpedIn; ShapCnat or Twitting. I'm just not that interesting.

  6. #6
    Join Date
    Jan 1970
    Location
    brisbane , QLD
    Posts
    65
    Total Downloaded
    0
    thanks guys might try the penrite hpr gas see how she goes on that.

    cheers
    jeff

  7. #7
    Join Date
    Jan 1970
    Location
    Box Hill, Victoria
    Posts
    1,170
    Total Downloaded
    0
    I run Penrite HPR Gas 20w-60 as well.
    Seems OK

    Cheers

  8. #8
    Join Date
    Jan 1970
    Location
    NSW far north coast
    Posts
    17,285
    Total Downloaded
    0
    An oil that has 'suitable for LPG use' in it's applications would be the best.
    These generally are formulated to resist nitration better than most oils.
    While yes, the oil stays cleaner with LPG, nitration can be a real issue, I've seen some test results from here in Oz on two turbo diesel vehicles with LPG injection and the oil was toast (excessive nitration) before a regular 10,000km oil change, and this was using a premium synthetic diesel oil.

  9. #9
    Join Date
    Apr 2009
    Posts
    56
    Total Downloaded
    0
    Quote Originally Posted by DaveS3 View Post
    I run Penrite HPR Gas 20w-60 as well.
    Seems OK

    Cheers
    Yep,I second that,it's good stuff.

  10. #10
    Join Date
    Sep 2007
    Location
    Hobart
    Posts
    643
    Total Downloaded
    0
    Have been using penrite hpr10 gas in my lpg 81rrc oil fairly clean at 5000km change intervals. Not really sure of the actual cause but I recently changed from hpr10 gas in our lpg falcon to gtx3 which they say is suitable for lpg. The oil ended up much blacker looking at change time using the gtx3.

    Pete

Page 1 of 2 12 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!