Page 2 of 2 FirstFirst 12
Results 11 to 18 of 18

Thread: The Rebirth of a 6x6 Ambulance, into well I'm Not sure yet

  1. #11
    Join Date
    Jan 2014
    Location
    mackay
    Posts
    36
    Total Downloaded
    0
    Only getting 14psi from the turbo, i was looking for 20psi, i will wire the wastegate shut and see if that helps.

    Can cruise comfortably on the highway at 110kph now.

    Low range and high range performance is the same as my county.

    6x6 weighed in at 3120kg

    Sent from my SM-G900I using AULRO mobile app

  2. #12
    Join Date
    Jun 2014
    Location
    Waitakere, New Zealand
    Posts
    1,270
    Total Downloaded
    0
    Almost the weight of a Nissan Safari!

    Sent from my Nexus 4 using AULRO mobile app

  3. #13
    rovernutter Guest
    Quote Originally Posted by samuelwest View Post
    6x6 weighed in at 3120kg
    How does it drive now that you have taken 400 to 500kg off the rear axles?

  4. #14
    Join Date
    Jan 2014
    Location
    mackay
    Posts
    36
    Total Downloaded
    0
    My pregnant wife says it's rough haha i think its fine, the welder and compressor come in at 800kg so should settle it down a little.
    Also fitting a large stainless water tank and slide out drawer at some stage. Fitting a billet 6 point breather at the moment, 3 points for the diffs, gearbox,transfer and winch

    Sent from my SM-G900I using AULRO mobile app

  5. #15
    Perentie Brad Guest
    Great job I wish I lived closer I'd drop by with mine for inspiration, love the truck stack might do the same

  6. #16
    Join Date
    May 2006
    Location
    Woolgoolga
    Posts
    7,870
    Total Downloaded
    0
    Quote Originally Posted by samuelwest View Post
    Only getting 14psi from the turbo, i was looking for 20psi, i will wire the wastegate shut and see if that helps.

    Can cruise comfortably on the highway at 110kph now.

    Low range and high range performance is the same as my county.

    6x6 weighed in at 3120kg

    Sent from my SM-G900I using AULRO mobile app
    What spring is in the wastegate actuator?? Mine came with a 7psi, changed it to a 22psi and adjusted the actuator, now running 28psi. Same turbo as you😊

  7. #17
    Join Date
    Jan 2014
    Location
    mackay
    Posts
    36
    Total Downloaded
    0
    I think it's the 22 psi spring, it the dark blue one. I adjusted the wastegate by 3 turns after closed, is there another way to adjust the wastegate? I don't know much about turbos or wastegates. Im just winging it at the moment haha

    Sent from my SM-G900I using AULRO mobile app

  8. #18
    cooee is offline Master Silver Subscriber
    Join Date
    Jan 1970
    Location
    Gold Coast
    Posts
    158
    Total Downloaded
    0

    6x6

    samuel
    you have done great job love build on tray really sets it off look foward to see your next stage
    look foward to seeing you on road some
    cheers cooee

  9. #19
    Join Date
    May 2006
    Location
    Woolgoolga
    Posts
    7,870
    Total Downloaded
    0
    Quote Originally Posted by samuelwest View Post
    I think it's the 22 psi spring, it the dark blue one. I adjusted the wastegate by 3 turns after closed, is there another way to adjust the wastegate? I don't know much about turbos or wastegates. Im just winging it at the moment haha

    Sent from my SM-G900I using AULRO mobile app
    Keep adjusting the actuater rod, I did mine more than 8 turns I think, but also need to adjust the fuel. From memory fuel screw is out about 3.5 turns.

Page 2 of 2 FirstFirst 12

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!