Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Series 2 chassis number

  1. #1
    Join Date
    Aug 2006
    Location
    Brisbane
    Posts
    743
    Total Downloaded
    0

    Series 2 chassis number

    Hey guys, can anybody give me some details on the following chassis number

    25306585b

    Apparently an ex-mil chassis.

    Cheers Paul

  2. #2
    Join Date
    May 2008
    Location
    Bundaberg Qld
    Posts
    7,036
    Total Downloaded
    0
    Have a look at the REMLR site. 253?????b is a LWB mid 60s jigger iirc

  3. #3
    Join Date
    Aug 2006
    Location
    Brisbane
    Posts
    743
    Total Downloaded
    0
    So I have been having dramas getting onto the REMLR forum, can't get an account to activate after trying several times. Any other way I can find more detales about this chassis number

    Cheers Paul

  4. #4
    Join Date
    Nov 2009
    Location
    Western Victoria
    Posts
    14,101
    Total Downloaded
    0
    You don't need to get on the REMLR forum.
    Army Registration Lists and Database - REMLR
    Though it would be nice to see you there.

  5. #5
    Join Date
    Nov 2009
    Location
    Western Victoria
    Posts
    14,101
    Total Downloaded
    0
    How odd.
    25306584b is ARN 112-993
    25306586b is ARN 113-055

    Can't find 25306585b

  6. #6
    LandroverScott Guest
    Maybe not a military vehicle.

    Photo of rear cross member will soon identify it as military or civvi.

    Regards

  7. #7
    Join Date
    Aug 2006
    Location
    Brisbane
    Posts
    743
    Total Downloaded
    0
    Ok so I searched the engine number (25174069F), and it matches up with the chassis number 25305685b, have double checked the chassis number and it is 65 not 56. Could this be a typo on the remlr database?. The rear crossmember is a civi one, but I can see it has been replaced.

  8. #8
    Join Date
    Aug 2006
    Location
    Brisbane
    Posts
    743
    Total Downloaded
    0
    Also has a few of the other military 2a features, left and right fuel tanks with selector near hand brake, mechanical oil pressure and water temp gauge. Stripped back the paint on a few places to find the original coat of gloss dark bronze green, on top of that where two shades of the matte army green then the current paint.

  9. #9
    LandroverScott Guest
    sounds like a typo on the database,

    where is the high beam dipper switch?

    regards

  10. #10
    Join Date
    Aug 2006
    Location
    Brisbane
    Posts
    743
    Total Downloaded
    0
    Quote Originally Posted by LandroverScott View Post
    sounds like a typo on the database,

    where is the high beam dipper switch?

    regards
    Dipper is in the civvi position, but it is mounted on a seperate plate riveted to the footwell. Will have to have another look when I go into work, can't recall if there is a mounting point between the clutch and brake that may be covered up

    Cheers Paul.

Page 1 of 2 12 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!