Thread: SADF Radio Relay Truck - Gog

Originally Posted by Lotz-A-Landies

Sad news:

The ebay ad above: Protex Brake Disc Rotor Maserati Biturbo 82 88 2 0 2 5L Front Solid | eBay
So still looking for a front rotor for a Maserati Biturbo 2.0 and 2.5 1982-1988 any condition.

Did you try this lot?

Front Disc Brake Rotor Honda CIVIC City Concerto CRX | eBay

you could try here free to join then can post a request.

Maserati Forum - The Site for Maserati Owners

bit slow on traffic but quite helpful.

ebay UK has lots of listings

1987 Honda CRX front rotor:
Diameter 242
Centre hole 61
Height 44
4 stud

Repco has 17 in Queensland, more around the country I'd guess

Thanks Sprint there are a few others with a height greater than 44mm, so trying for them first. Also trying to avoid ventilated and other rotors greater than 1/2" thick because I may still have to use the caliper from the X-Eng kit.

I have ordered a pair of the biturbo rotors from an Oz vendor who previously stated he wouldn't supply a single rotor. Will have to wait and see if they arrive.

Amazing thanks for your suggestion, I did contact the Mazerati Club of NSW and registered on the Oz Exotics forum who sent me back to the ebay ads.

Part # DF1963S

Crikey don't let word get out to the Toyota crowd that you need a Maserati piece for a Land Rover. They already **** take about the cost of LR parts....

One of the comments from the Oz Exotics forum was that he couldn't imagine how a rare Maserati part could be more common than a rare Landy part!

I did some more fine measurements of the positioning of the short R380/LT230 into the SIIB chassis and I will have about 80mm clearance from the rear output flange to the crossmember. (60mm clearance from the bolts in the flange) This may allow me to still use the X-Eng caliper which will solve my problems finding a alternate caliper with sufficient holding for a 2.7ton Landy.