Page 4 of 7 FirstFirst ... 23456 ... LastLast
Results 31 to 40 of 68

Thread: Track trailer canvas

  1. #31
    Join Date
    Nov 2009
    Location
    Western Victoria
    Posts
    14,101
    Total Downloaded
    0
    Quote Originally Posted by 100 td View Post
    Hi Scott, not sure I'm reading this correctly, do you already have the canvas for these, are you the maker?
    I don't want to upset the apple cart here but there is a post on remlr from an old canvas maker in Melbourne who has templates of military canvases from about 1968 or something, he doesn't have one for this trailer, but has said he can make them if he gets a couple of photos and some trailer measurements. He can get special fabric runs made of the old army canvas if there is enough quantity, or supply something cheaper, but very similar. Is it worth getting a second price?
    Note, if you have the canvas and want to use it up then go with what you are organising. If I get one, I would want to go non-OEM, and have a vertical zip in the centre rear panel as well as an extra eyelet at the bottom of each corner where the zip is. Is this a possibility? $? I'm still debating........
    Yes. Allen, aka Restless Rover.
    You got a series or an Inter, he's the one to go to. I got my Inter tarp from him and am about to order a 2a tilt.
    Scott has my tarp for the Track. He has access to the canvas and people with the skills.
    Yep, let's not upset the apple cart. I'd be most upset if my Track tarp got sent interstate. I lent my 101 jack handle and starting handle to someone in Victoria to copy and haven't heard about them for a year now. I'm a little upset about that. They're hard to come by.

  2. #32
    Join Date
    Sep 2011
    Location
    NSW
    Posts
    31
    Total Downloaded
    0
    Quote Originally Posted by 100 td View Post
    there is a post on remlr from an old canvas maker in Melbourne who has templates of military canvases
    Quote Originally Posted by Mick_Marsh View Post
    I'd be most upset if my Track tarp got sent interstate.
    Sorry Mick, didn't realise you guys had seceeded!

  3. #33
    Join Date
    Sep 2011
    Location
    NSW
    Posts
    31
    Total Downloaded
    0
    Quote Originally Posted by LandroverScott View Post

    You'd be better getting one of these then getting it altered by a local canvas shop when fitted to your trailer.

    Hope that helps.
    Regards
    Hi Scott, so no chance of the zip/eylets being installed at manufacture?

  4. #34
    Join Date
    Nov 2009
    Location
    Western Victoria
    Posts
    14,101
    Total Downloaded
    0
    Quote Originally Posted by 100 td View Post
    Sorry Mick, didn't realise you guys had seceeded!
    Sorry. I thought you were talking about Allen. He is in Queensland.
    Who is the fellow you are talking about?

    Yeah, sometimes I get the feeling we have seceded. I was traveling back to Victoria last night and was stopped by border control. It appears Digger has put a bolo out on me.

  5. #35
    Join Date
    Sep 2011
    Location
    NSW
    Posts
    31
    Total Downloaded
    0
    Quote Originally Posted by Mick_Marsh View Post
    Who is the fellow you are talking about?
    http://www.remlr.com/forum/index.php'topic=4040.15
    The post has a Mick Marsh in it which I presume is you?
    Also a Scott who said for this guy to organise canvas, so possibly the same Scott FFRMAN?
    It appears I may have read his post incorrectly about patterns he has as well, he says he can still make most of their products to the Aust Military specs.
    Also I think I found "Allen" this morning, not realising it was who you were talking about as his site is more about Mongolian travel!
    Warren

  6. #36
    Join Date
    Sep 2011
    Location
    NSW
    Posts
    31
    Total Downloaded
    0
    AULRO is changing the link above? Just comes back to this page or blank page?

  7. #37
    Join Date
    Nov 2009
    Location
    Western Victoria
    Posts
    14,101
    Total Downloaded
    0
    Quote Originally Posted by 100 td View Post
    http://www.remlr.com/forum/index.php'topic=4040.15
    The post has a Mick Marsh in it which I presume is you?
    Also a Scott who said for this guy to organise canvas, so possibly the same Scott FFRMAN?
    It appears I may have read his post incorrectly about patterns he has as well, he says he can still make most of their products to the Aust Military specs.
    Also I think I found "Allen" this morning, not realising it was who you were talking about as his site is more about Mongolian travel!
    Warren
    Yep, now we're on the same page.
    Yep, Allen does do a lot of traveling. I'd say that would be his site. Contact him through the email address on REMLR though, if you want some of his products.

  8. #38
    Join Date
    Nov 2009
    Location
    Western Victoria
    Posts
    14,101
    Total Downloaded
    0
    Quote Originally Posted by 100 td View Post
    AULRO is changing the link above? Just comes back to this page or blank page?
    Works for me. Might be more of those Google issues.

  9. #39
    LandroverScott Guest
    Quote Originally Posted by 100 td View Post
    Hi Scott, so no chance of the zip/eylets being installed at manufacture?

    Hi, yes it's possible as lone as it's clearly specified it should be right.

    Cheers

  10. #40
    LandroverScott Guest
    Ok so they will be $330 incl GST delivered via Aust post parcel bag.

    Can you please confirm and PM me you details. When done I will call for cc number

    Cheers.
    Scott

Page 4 of 7 FirstFirst ... 23456 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!