Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15

Thread: Old TCM forklift transmission

  1. #11
    Join Date
    Jan 2008
    Location
    Nowra NSW
    Posts
    3,828
    Correct and correct.

  2. #12
    Join Date
    Sep 2008
    Location
    Geelong, VIC
    Posts
    4,295
    Good news is the trans is driving the diff.
    Bad news is that the dislocated splined collar in the earlier photo is one of the diff side gears.
    With the left side axle pulled I can see that RH side gear floating around in the diff when I select drive on the trans with engine running.

    Looks like Iím about to find out how to pull the mast and diff housing!!

    Steve
    1985 County - Isuzu 4bd1 with HX30W turbo, LT95, 255/85-16 KM2's
    1988 120 with rust and potential
    1999 300tdi 130 single cab - "stock as bro"
    2003 D2a Td5 - the boss's daily drive

  3. #13
    Join Date
    Sep 2008
    Location
    Geelong, VIC
    Posts
    4,295




    Not much to say really.

    Anyone got a lead on where to get a new diff??

    Steve
    1985 County - Isuzu 4bd1 with HX30W turbo, LT95, 255/85-16 KM2's
    1988 120 with rust and potential
    1999 300tdi 130 single cab - "stock as bro"
    2003 D2a Td5 - the boss's daily drive

  4. #14
    Join Date
    Jan 2008
    Location
    Nowra NSW
    Posts
    3,828
    Model and serial number.
    Can get the bits.......It will not be cheap.
    Need list of bits.
    Model should go some thing like
    FG15
    I think the motor should be a J15 or A15.
    Information before P and A on parts is everything.
    I think the general model range of that vintage was called a S series TCM

  5. #15
    Join Date
    Sep 2008
    Location
    Geelong, VIC
    Posts
    4,295
    Thanks Ron. PM sent.

    Steve
    1985 County - Isuzu 4bd1 with HX30W turbo, LT95, 255/85-16 KM2's
    1988 120 with rust and potential
    1999 300tdi 130 single cab - "stock as bro"
    2003 D2a Td5 - the boss's daily drive

Page 2 of 2 FirstFirst 12

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!