Page 4 of 6 FirstFirst ... 23456 LastLast
Results 31 to 40 of 54

Thread: BeCM waking up - dead battery

  1. #31
    Join Date
    Oct 2010
    Location
    Carindale, Brisbane, Qld
    Posts
    652
    Total Downloaded
    0
    More info on the RR not sleeping in my garage. I persevere because another may find the diagnostics useful in the future, and I would also like to understand this problem rather than just fix it.

    I am quite sure that this problem is localised to my garage, and not connected to my recent "Immobiliser/suspect-BeCM" problem or my recent

    If I park the 2000 4.6 in the garage, the gear selector light comes on again about 25 seconds after going out. The same thing happens in my driveway or front yard or street front parking.

    If it is parked on the other side of the street, it sleeps soundly. If parked at work or a friends, it sleeps soundly.

    So, this morning I parked it in the garage, locked it, and then hit the mains to the house and also isolated the solar panels and inverter - all of which are very close to the car outside the garage. She still woke up. I think this means I can rule out my house as the source of the interference.

  2. #32
    Join Date
    Apr 2009
    Location
    Crafers West South Australia
    Posts
    11,732
    Total Downloaded
    0
    Interesting! Maybe your next-door-neighbour has a sleazy Paj your P38 is having a talk to...

    Or next door is a secret bikie fortress with funny electronic equipment. Sneak over and pull his main switch down too...

  3. #33
    Join Date
    Jun 2008
    Location
    Suburban Canberra
    Posts
    1,024
    Total Downloaded
    0
    There was a scare some 20 years ago in the UK about electromagnetic fields in houses that were generated by near by power lines and power boards, affecting kids development.

    You could get a little box called a Field Mouse that you walk around your house and it measures the different levels of flux (someone with more electrical brains than me can fill in the right terminology).

    Try to find an equivilant elector magnetic flux reader thingy and measure your garage and house. Both with the power on and off.

    If I'm not mistaken your power board will still generate electric flux fields even when the power board is switched off. Something to do with the electricity just being there waiting for you.........

    Be warned you may not like what you find.

  4. #34
    Join Date
    Jan 1970
    Location
    Avoca Beach
    Posts
    14,152
    Total Downloaded
    0
    Er, you don't have one of them new fangled weather stations by any chance.
    The ones that have the temp sensor outside and relay the data to the home base inside.
    They are notorious for causing 38As to wake up.
    Regards Philip A

  5. #35
    Join Date
    Oct 2010
    Location
    Carindale, Brisbane, Qld
    Posts
    652
    Total Downloaded
    0
    Quote Originally Posted by PhilipA View Post
    Er, you don't have one of them new fangled weather stations by any chance.
    The ones that have the temp sensor outside and relay the data to the home base inside.
    They are notorious for causing 38As to wake up.
    Regards Philip A
    No, and I have checked that the neighbours are weather station-less too. I am determined...

    My friend has a spectrum analyser, and I was hopefull but it only had wifi frequencies which are WAY higher than 415/433.

  6. #36
    Join Date
    Aug 2007
    Location
    Brisbane
    Posts
    3,234
    Total Downloaded
    0
    Disclaimer: I have only rudimentary knowledge of what my son cheerfully refers to as "queer trader" stuff... himself being categorised as "black hander" ...I'm sure there are others on this site familiar with this terminology

    The 433MHz band appears to be a very busy place... and is used for all sorts of applications. However, the manner in which transmitting devices in this frequency range are modulated impacts on the extent to which they might cause interference (= sleepy interest?) to a dozing BECM

    Burgular alarms, wireless ethernet networks, doorbells, weather stations and baby monitors to name a few all operate in this band...according to their website, 10% of phone calls for assistance to B&D roller doors related to 433MHz interference issues...

    Good luck with your investigation Sherlock a spectrum analyser and some detective work might just crack it!

  7. #37
    Join Date
    Jan 1970
    Location
    Avoca Beach
    Posts
    14,152
    Total Downloaded
    0
    How about remote control ceiling fans?
    Regards Philip A

  8. #38
    Join Date
    Jun 2008
    Location
    Suburban Canberra
    Posts
    1,024
    Total Downloaded
    0
    It may not be a case of a steady frequency. It could be a blip across frequencies. Can you get a spectrum analyser that records over a couple of hours?

  9. #39
    Join Date
    Feb 2010
    Location
    Townsville, QLD
    Posts
    2,581
    Total Downloaded
    0
    I doubt it would be your solar panels and inverter - i've got a 2kW system on my roof too and both P38's never had an issue. The only time my Green one got the ****s was when parked near overhead power lines!

    Cheers
    Keithy

  10. #40
    Join Date
    Apr 2009
    Location
    Crafers West South Australia
    Posts
    11,732
    Total Downloaded
    0
    Saw a set of four power meter plugs at Jaycar this morning, guess what, they communicate at 433 MHz . Claimed range of 30m. What else is there nattering away next door on this band?

Page 4 of 6 FirstFirst ... 23456 LastLast

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!