Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: hse spare wheel

  1. #1
    GT10 Guest

    hse spare wheel

    i recently purchased a '95 hse on gas, the gas tank is a donut type in the spare wheel recess, the prob i have now is where to & how to secure the spare wheel! i,m trying to avoid the spare wheel carrier set up, anyone have any original ideas??

  2. #2
    p38arover's Avatar
    p38arover is offline Major part of the heart and soul of AULRO.com
    Administrator
    I'm here to help you!
    Gold Subscriber
    Join Date
    Jan 1970
    Location
    Western Sydney
    Posts
    30,708
    Total Downloaded
    1.63 MB
    I've seen vertical wheel mounts as was done in the RR classic. I'm tempted to go that way and to get rid of the Kaymar rear bar and wheel carrier.
    Ron B.
    VK2OTC

    2003 L322 Range Rover Vogue 4.4 V8 Auto
    2007 Yamaha XJR1300
    Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA



    RIP Bucko - Riding on Forever

  3. #3
    Join Date
    Jan 1970
    Location
    NSW Far South Coast
    Posts
    685
    Total Downloaded
    0
    Here's what I did with mine.









    When I go on long camping trips the spare wheel goes on the roof rack and a drawer full of camping gear goes in its place.

    But Ron, hurry up and decide you DO want to sell me your rear bar and carrier!

  4. #4
    p38arover's Avatar
    p38arover is offline Major part of the heart and soul of AULRO.com
    Administrator
    I'm here to help you!
    Gold Subscriber
    Join Date
    Jan 1970
    Location
    Western Sydney
    Posts
    30,708
    Total Downloaded
    1.63 MB
    Quote Originally Posted by ytt105 View Post
    But Ron, hurry up and decide you DO want to sell me your rear bar and carrier!
    Can you afford what I want for it?
    Ron B.
    VK2OTC

    2003 L322 Range Rover Vogue 4.4 V8 Auto
    2007 Yamaha XJR1300
    Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA



    RIP Bucko - Riding on Forever

  5. #5
    Join Date
    Jan 1970
    Location
    NSW Far South Coast
    Posts
    685
    Total Downloaded
    0
    Probably not, but the question remains. How much?

  6. #6
    jsp's Avatar
    jsp is offline Master Silver Subscriber
    Join Date
    Apr 2007
    Location
    South Australia
    Posts
    934
    Total Downloaded
    0
    Do you want the wheel inside or outside the car?

    My LPG installer did a fantastic job and put a wheel mount on top of the LPG tank, to I just put a bolt through the center of the wheel and its clamped to the floor in the back. I have put it on the roof on a few long trips to save in car space. And I also carry a few cans of goo for the occasional trip without the spare at all.

    2007/2002/2000/1994/1993/1988/1987/1985/1984/1981/1979/1973 Range Rover 1986 Wadham Stringer
    and a Nissan Cube............
    South Australia.

  7. #7
    p38arover's Avatar
    p38arover is offline Major part of the heart and soul of AULRO.com
    Administrator
    I'm here to help you!
    Gold Subscriber
    Join Date
    Jan 1970
    Location
    Western Sydney
    Posts
    30,708
    Total Downloaded
    1.63 MB
    Quote Originally Posted by jsp View Post
    My LPG installer did a fantastic job and put a wheel mount on top of the LPG tank, to I just put a bolt through the center of the wheel and its clamped to the floor in the back.
    Pics, John?
    Ron B.
    VK2OTC

    2003 L322 Range Rover Vogue 4.4 V8 Auto
    2007 Yamaha XJR1300
    Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA



    RIP Bucko - Riding on Forever

  8. #8
    jsp's Avatar
    jsp is offline Master Silver Subscriber
    Join Date
    Apr 2007
    Location
    South Australia
    Posts
    934
    Total Downloaded
    0
    I dont actually have pictures of it believe it or not...and I am a few hours away from the car!

    here's one of bee utey's, exactly the same as mine, bee utey gets all the credit!

    Look in the top right corner you see the solid arm with a bulky nut welded on, then there's a hole through the floor/lift up wheel well cover and the tire sits in the back and has a large bolt through it and through the floor to the pictured mount.


    2007/2002/2000/1994/1993/1988/1987/1985/1984/1981/1979/1973 Range Rover 1986 Wadham Stringer
    and a Nissan Cube............
    South Australia.

  9. #9
    Join Date
    Jun 2009
    Location
    Melbourne
    Posts
    1,665
    Total Downloaded
    0
    Hey Ron you better put that bar/wheel carrier on e-bay... I reckon there are a few potential bidders ready to go to war for a genuine P38 Kaymar bar!

  10. #10
    GT10 Guest
    Quote Originally Posted by jsp View Post
    Do you want the wheel inside or outside the car?

    My LPG installer did a fantastic job and put a wheel mount on top of the LPG tank, to I just put a bolt through the center of the wheel and its clamped to the floor in the back. I have put it on the roof on a few long trips to save in car space. And I also carry a few cans of goo for the occasional trip without the spare at all.

    ideally i,d like it inside & upright to one side, to try & keep the avaiable space to a max!

Page 1 of 2 12 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!