Thread: Range Rover P38 Dash Removal Brisbane

It's a fairly substantial job but from this: evaporator
it looks the best way to approach it. Put the whole dash on the bench.

I've replaced the dashtop on mine like this: Dash Removal and Replacement (Range Rover 4.0/4.6/p38)
and did the blend motors and heater core at the same time.

As I had the heater completely out, I could have replaced the evap if needed.

you could try a sealer for the evaporator. Wurth do a product which they claim seals ac leaks permanently.
95 p38 dash boards can be a nightmare, as the SRS loom is in one piece and runs from under the cubby box, through the dash frame and ends up behind the head lights. sometimes it is easier to remove just the dash skin, leaving the 2 parts of the frame in situe, then dismantle the 2 halves of the heater/ac box.(8 hours instead of 16).

Good point Rupert.

When I did mine, after removing the top skin (to fit a new one), I found it easy to remove the heater box leaving the evaporator in place.

Originally Posted by Rupert Prior

you could try a sealer for the evaporator. Wurth do a product which they claim seals ac leaks permanently.
95 p38 dash boards can be a nightmare, as the SRS loom is in one piece and runs from under the cubby box, through the dash frame and ends up behind the head lights. sometimes it is easier to remove just the dash skin, leaving the 2 parts of the frame in situe, then dismantle the 2 halves of the heater/ac box.(8 hours instead of 16).

Thanks Rupert,will investigate the wurth sealer.If I could find someone in Brisbane who can do it in 8 hours I would get them to do it.

Regards p38 xtreme

Hi ,
new to posting threads but appreciate anyone's views on who to send a P38 rangie in Brisbane to have the heater core ,blend motors and evaporator replaced
.
Regards P 38 Xtreme

mrautomotive - Home

These guys are in Redcliffe.

There's another mob at Bowen Hills but I can't remember there names.

Threads merged. Don't post the same question in multiple areas.

I agree. MR automotive in Redcliffe are a good option. They know LRs. Dont know many other good operators in Brissy (yet).