Radiators!!!

Quote:

---

Originally Posted by redandy3575

I'm wondering if electrosys is the case, wether that can break the joins within 12months? I would have thought its more a corrossion issue with the aluminium.

---

I don't think it's an electrolysis issue mate, sounds more like physical strain or it could just be a poor seal

It is nice an tight in the mounts?

Steve

I have had similar issues in the past. Took the rad out and had it pressure tested, leaking round the bottom seal after 2 years. Had the crimp tightened and good for another year till it started seeping again. Put in another Rad before I sold the car and the leaky one is in my garage for emergencies. The one that I still have came from the UK. The last one I fitted sourced via Sydney was made in the UAE. You would hope the the Saudis can make a good rad.

Quote:

---

Originally Posted by redandy3575

I honestly dont know the reason for this,but i've never encountered any vehicle in the past that goes through radiators like there is no tomorrow. Had a new radiator put in last year in May when the head gasket got done, however little over a year, it's leaking on the bottom tank joints. I took it out, tried re-clamping it with no luck only making the situation worse. The previous radiator got me about 2 years with the same problem. The one before that also.

3 radiators in 4 years, what a joke!! Where is the quality gone these days?? Surely this cannot be a P38 syndrome, finding a geniuine radiator seems fruitless, and getting one made up at Aussie dessert coolers is rather expensive, though the money ive spent over the years i reckon it would have easily paid for iteself. What is going on in these manufacturing lands i.e China, Scottland etc where these radiators come from? They must be manufaturing them with major flaws or bad quality control. Can hardly call them OEM standard.

---

See http://www.aulro.com/afvb/p38a-range...le-4x4ing.html Post #5
I bought one last year, doing well.

Quote:

---

Originally Posted by SteveFarmer

It is nice an tight in the mounts?

Steve

---

I bought a new one, arrived today. It does sit tight in the mounts with no movements. I also replaced the thermostad, new fan and thermo clutch.

Good luck mate

Steve