Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Roof bar mounting detail for P38

  1. #1
    Join Date
    May 2008
    Location
    Camp Hill, Brisbane
    Posts
    218
    Total Downloaded
    0

    Roof bar mounting detail for P38

    Hi all,

    I have a collection of Rhino roof bar legs and was hoping to adapt some to the P38 roof mounting points. Would anyone be able to post an image or sketch of a "real" one so I can see if this is a possibility?

    TIA

    Steve

  2. #2
    p38arover's Avatar
    p38arover is online now Major part of the heart and soul of AULRO.com
    Administrator
    I'm here to help you!
    Gold Subscriber
    Join Date
    Jan 1970
    Location
    Western Sydney
    Posts
    30,708
    Total Downloaded
    1.63 MB
    Go to Rhino and look for RLTPRR legs. Download the fitting instructions.

    Here, I've done it for you.

    RLTP Leg Set - #RLTPRR | Rhino-Rack

    [ame]http://rhino-rack-vpm.s3.amazonaws.com/Instructions/Parts/Legs/RLTPRR.pdf[/ame]

    Don't expect any reply from Rhino when asking about kits to adapt other RLTP legs one may have. They don't bother replying.
    Last edited by p38arover; 8th October 2014 at 06:27 PM.
    Ron B.
    VK2OTC

    2003 L322 Range Rover Vogue 4.4 V8 Auto
    2007 Yamaha XJR1300
    Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA



    RIP Bucko - Riding on Forever

  3. #3
    Join Date
    Aug 2010
    Location
    Wodonga Victoria
    Posts
    103
    Total Downloaded
    0
    The three bars just have to be level to each other and clear the roof by a bit so anything that fits that discription should do.

  4. #4
    Join Date
    Mar 2008
    Location
    Coogee, South of Fremantle, WA
    Posts
    1,550
    Total Downloaded
    0
    I should be quite easy as I managed to get an old school gutter mount rack to fit the mounts

  5. #5
    Join Date
    May 2013
    Location
    Manly West, Brisbane
    Posts
    138
    Total Downloaded
    0
    Note that the P38 has a curved roof so if you go for a three bar set you will need to have a lower height bar in the center or use spacers on the front and rear bars if they are all the same type.

    I have three of the Whisbar HD bars on my P38 and had to use a 15mm spacer kit on the front and another on the back, the three are now perfectly level.

  6. #6
    Join Date
    Feb 2013
    Location
    Gosford, NSW, Australia
    Posts
    2,556
    Total Downloaded
    0
    Quote Originally Posted by rc42 View Post
    Note that the P38 has a curved roof so if you go for a three bar set you will need to have a lower height bar in the center or use spacers on the front and rear bars if they are all the same type.

    I have three of the Whisbar HD bars on my P38 and had to use a 15mm spacer kit on the front and another on the back, the three are now perfectly level.
    Are the spacer kits available or did you make them up?

    I have the same issue with my WhispBars

    Steve

  7. #7
    Join Date
    May 2013
    Location
    Manly West, Brisbane
    Posts
    138
    Total Downloaded
    0
    These HD spacer kits have three 5mm spacers for each end of the bar, I didn't buy them from the link below but a Google search will no doubt find somewhere close. Supercheap would also be able to get them for you as they carry the Whisbar range.



    Prorack Whispbar Hd Height Spacer, 15Mm - Rays Outdoors

  8. #8
    Join Date
    Feb 2013
    Location
    Gosford, NSW, Australia
    Posts
    2,556
    Total Downloaded
    0
    Quote Originally Posted by rc42 View Post
    These HD spacer kits have three 5mm spacers for each end of the bar, I didn't buy them from the link below but a Google search will no doubt find somewhere close. Supercheap would also be able to get them for you as they carry the Whisbar range.

    Prorack Whispbar Hd Height Spacer, 15Mm - Rays Outdoors
    Thanks mate

  9. #9
    Rage Over Guest
    I take it you've all seen these ones:




  10. #10
    Rage Over Guest
    See here (don't shoot me for cross-linking!):
    Roof rack bracket

Page 1 of 2 12 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!