Results 1 to 4 of 4

Thread: Bloody HEVAC

  1. 8th November 2014, 10:51 AM #1
    Rushy
    Rushy is offline Fossicker
    Join Date
    Jan 2010
    Location
    Narangba
    Posts
    45
    Total Downloaded
    0

    Smile Bloody HEVAC

    If there is someone in the Brisbane area who has done, is interested in or can offer advice on replacing the drivers side blend motor I would be more than happy to chat. I have had the blend motors replaced twice in 2 years by a well known LR specialist but I am loathe to try them a third time. It is only the drivers side and I believe the cause of recent failure has been due to just replacing the motors and not checking the blend flaps for free operation or cleaning out any foreign material that may have been trapped in there. My car is an MY 2001 but I don't know whether the blend motor is a 2 wire or a 5 wire, both of which are available on Ebay
    Looking forward to being flooded with replies
    yours truly

    Rushy
    Reply With Quote Reply With Quote
  2. 8th November 2014, 06:49 PM #2
    blindin
    blindin is offline Master
    Join Date
    Jul 2013
    Location
    perth wa
    Posts
    207
    Total Downloaded
    0
    Hello rushy.
    I have had my drivers blend motor out of my 98 gems.
    It's a ***** of a job. If you can remove your trim along the centre console, and the instrument cluster, you maybe able to get to it.
    If your keen, you can remove all the centre console, it really isn't to hard.
    The worst bit is the heater duct which is really the only troublesome part of the job.
    I found that all my trim was brittle, and I got fed up having to remove it all 3 times in one weekend for several jobs. I would strongly suggest just cutting the duct, then just bogging it back together some how.
    As far as the wires, I have seen the 2 wire blend motors, I thought they were for the recirculating flaps, but don't quote me on that. Mine are a 5 wire. 2 wire to power the motor, 3x wires to get the reading from the position.
    Good luck, you will probably be using some choice words.
    Mine is also needing replacement.
    Look at island 4x4 in the uk. There set is quite cheap, there maybe cheaper places, hopefully someone maybe able to confirm.
    Reply With Quote Reply With Quote
  3. 10th November 2014, 06:38 AM #3
    benji's Avatar
    benji
    benji is offline Wizard Supporter
    Join Date
    Jan 2012
    Location
    Bendigo
    Posts
    1,643
    Total Downloaded
    0
    Yeh that's correct blindin. 5 wires on the blend and air position motors, and two wires on the recirculation motors.

    Sent from my GT-I9305T using AULRO mobile app
    Reply With Quote Reply With Quote
  4. 11th November 2014, 07:31 AM #4
    TheTree
    TheTree is offline ChatterBox
    Join Date
    Feb 2013
    Location
    Gosford, NSW, Australia
    Posts
    2,556
    Total Downloaded
    0
    Also check my recent thread on blend motors and availability options are getting limited

    http://www.aulro.com/afvb/p38a-range...nd-motors.html

    Oh and i found LR direct to be the cheapest including postage

    Steve
    Reply With Quote Reply With Quote
« Plenum filter mesh. | eas hose identification »

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!