Thread: EASunlock Suite no connecting

Given the issues you've had of late, I wouldn't put it past (and this is a common thing lately) the EAS Driver unit is on its way out... The reason I say this is that the EAS is behaving strangely for you sometimes.

Otherwise, I'm stumped as to your issue!

Hope it helps!

Cheers
Keithy

Hi Paul, I am a newbie at this stuff so this may be off the mark but I had an issue with one of my laptop comms ports after a windows update that gave me comms issues. I changed ports and all is fine. Cheers Tim

Do you use a yellow relay, did you put the timer one back in?

I know it's a silly suggestion, but I must admit I've done it!

Corrosion on the ODB connector is a common problem as well

Steve

Ok so an update, had a few hours up my sleeve today and messed around for a while after hours of searching online for a solution. Checked obd port wiring, fuses, disconnected and reconnected eas timer, tried an old windows xp laptop but no luck. Finally, with the engine running and software running I again disconnected and reconnected the eas timer relay and it started working again.

What that did i have no idea.

So next strange happening. Like i said previously seconds before the software stopped connecting i was able upload the new heights from the calibration blocks to the eas, and the heights have been and continued to be fine. When i read the heights today (read all in the unlock suite) the heights in the display seem to be the old heights i had in the system previously???

Any ideas, maybe i need to unlock the eas.

Anyway some more fun for this weekend.

Paul

Paul
What version of EAS unlock are you using?

Originally Posted by mtb_gary

Paul
What version of EAS unlock are you using?

W

V2, worth updating?

I've got the latest licenced version on my laptop. I could swing by at some stage and hook it up if you want

Sent from my SM-G935F using AULRO mobile app