I'm unhingedhttps://www.aulro.com/afvb/images/im...17/04/1068.jpghttps://www.aulro.com/afvb/images/im...17/04/1069.jpg
Printable View
Sans glasshttps://www.aulro.com/afvb/images/im...17/04/1066.jpg
Although a heavy hand by a thick operator led to thishttps://www.aulro.com/afvb/images/im...17/04/1067.jpg
So I must stand in the corner now and count out enough coins for a new windscreen
Well that went well.
The weather this morning looked ordinary ( but started to improve so I masked up,cleaned, acid etched . Then checked the weather radar, all was clear.
Mixed up 1 lt of primer, started spraying and the rain started . I managed to get a light cover in most things and had to dump half a lt.
Now the sky is blue and u have no more primer.https://www.aulro.com/afvb/images/im...17/04/1038.jpg
https://www.aulro.com/afvb/images/im...17/04/1039.jpg
Sand back to remove stone [emoji489] https://www.aulro.com/afvb/images/im...17/04/1034.jpghttps://www.aulro.com/afvb/images/im...17/04/1035.jpg
[emoji42]
Looking sweet fitzy
Thanks Witchdoctor.
I was in a hurry to get some paint on as the weather is turning nasty, and the primer is a little absorbant.
I wasn't aiming for a good finish but the gloss straight of the gun has turned out pretty good.At this stage ill flat it back assemble and put on another coat.
The paint is an industrial polyurethane that won't have the gloss level of an automotive paint but is more robust. Perfect for a Landy