Thread: Making a manual eye splice after breaking your winch wire.

Originally Posted by Bush65

A brief part showed Paul Newman tieing a bowline knot on the run, apparently without taking his hand from the rope - an amazing feat if it can be done.

Not hard. Two flicks of the wrist and it's tied. But easier to do than to explain

Bit like your origami instructions

Apparently most of us have been tying our shoelaces incorrectly for our whole (shoe wearing) lives.

I've been waiting for a very long time to post this link
Ian's Shoelace Site - Shoelace Knots - How To Tie Your Shoes

And here's the one-handed bowline
The One Handed Bowline

Cheers
Simon

Originally Posted by abaddonxi

And here's the one-handed bowline
The One Handed Bowline

Between you, me, and the door post, I wouldn't go anywhere near that technique.

For one thing it'd take longer to prepare to tie the knot than to simply tie the flipping thing.

For another, bowlines are strong knots for situations where strength is required. Often when you need a bowline you are in a pressure situation (whether docking, in a stiff breeze on a yacht, making fast to someone who's in a risk situation, that kind of thing), so to loop a line and then to stick your hand through the loop is asking to have your wrist broken, getting yourself pulled over the side, having your hand/arm ripped off or crushed, etc. Get the idea?

Originally Posted by disco2hse

Between you, me, and the door post, I wouldn't go anywhere near that technique.

For one thing it'd take longer to prepare to tie the knot than to simply tie the flipping thing.

For another, bowlines are strong knots for situations where strength is required. Often when you need a bowline you are in a pressure situation (whether docking, in a stiff breeze on a yacht, making fast to someone who's in a risk situation, that kind of thing), so to loop a line and then to stick your hand through the loop is asking to have your wrist broken, getting yourself pulled over the side, having your hand/arm ripped off or crushed, etc. Get the idea?

I get seasick.

And I did notice the wrist thing.

Cheers
Simon

Originally Posted by langy

Well, it happens on a regular basis whilst winching: You damage a bit of the wire with a kink or fray, or an extra heavy load, and your cable breaks. But you can still use the stuff still on the drum, but you need an eye for the hook to go onto.

Whilst talking to Nobles at Silverwater ( A. Noble & Son Ltd ) about how I broke the my new cable a week after I bought it to replace the old (and also broken) cable, they taught me how to do a manual (Plimsoll?) eye in wire rope which will hold just as good as a machine made eye.

Unless it's after 3pm (Wire broker hours I suppose) , I can't recommend them any higher as to their helpfullness.



Split the wire into two for about 50cm. Generally the wire has 6 strands with a center wire core, so 3 on one side, 3 and the core on the other.





With the two ends, pretend they are shoelaces and loop them over.




wind the loose ends around each side of the loop - you'll find that the wire easily and neatly fits back together up to and including where you split it.





I'm using a hose clamp as an example - but duct tape, string, electrical tape or a rubber band will suffice to keep the ends nice and tight against the main wire. The strength (as it was explained to me) is in the bight of the wire, and as long as the ends don't 'pop' out (for want of a better expression) the eye is good for HD work.

I wouldn't trust that method as far as I could throw it, and whoever at Noble's told you that it was good wants his A..e kicked.
A proper splice has 6 full tucks and up to 6 half tucks, 3 or 4 proper size Bulldog clamps would be better, safer and quicker, but I still wouldn't stand within a 100 metres of that system either.
The tucks rely on friction and tightening of the splice to maintain the loop, you can buy a Line clamp from Nobles that has a set of jaws (shaped like the cable outer) that clamps onto the wire with an eye on the other end to hook a shackle and an extension strap/cable, the more weight applied the tighter the clamp grips, Don't frig around with half a..sed ideas it could kill you or someone else, Regards Frank.

Originally Posted by mcrover

Geez Ron, My 6yo doughter can tie her shoe laces, my 11 yo son can do truckies knots (I cant remember the correct name for them).

The Bakers Bowline?

A properly spliced wire/rope is alot better than any factory crimp job. I've had a few to many dodgy crimp jobs go on me while sailing to trust them (knowing how to splice is a bonus).