I contacted Tigerz11 with a few questions regarding the winch, one of the questions was in reference to it's compatibility with my front bar, I received the following response:
Hi
You need a min clearance of 200mm on the drivers side of your bulbar for the motor to fit ,,the motor on these winches are longer because of the brake mechanism.
S& G DISRIBUTORS IN HOBART
Regards Paul
0447064152I measured up and it is about 30mm too short. So there isn't enough clearance from the bolt holes in the ARB Sahara front bar to the chasis rails:bolt holes
Regards Paul
0447064152
![]()


Reply With Quote



Bookmarks