Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Recovery tracks....

  1. #1
    Dan90 Guest

    Recovery tracks....

    Hi guys, I just wanted to hear peoples opinion regarding recovery tracks, you know the ones, brightly coloured and fitted to nearly every roof rack you see.

    I have a set of treds and have tried to use the a couple of times on mud without to much luck.
    I am interested to use them in sand as I do expect them to perform better.

    I have been looking at storage options for them and trying to get a bracket for the rear wheel without too much success.

    Anyway, my questions are really,
    Are they actually any good?
    What did we do before they were invented? (Old school sand ladders or milk crates)
    Are they just a fasion statement?
    Now i have heard some good stories about people using them at the beach, and I realise the one time recovery equipment works it has proved it's value, but I'm starting to think they are more of a fasion statement than anything.....
    Some of the test videos iv'e watched are pretty suspect.

  2. #2
    Join Date
    Sep 2012
    Location
    Adelaide Hills
    Posts
    13,383
    Total Downloaded
    0
    quick and easy for a lot (but not all), situations.
    the hardest part is storage
    Current Cars:
    2013 E3 Maloo, 350kw
    2008 RRS, TDV8
    1995 VS Clubsport

    Previous Cars:
    2008 ML63, V8
    2002 VY SS Ute, 300kw
    2002 Disco 2, LS1 conversion

  3. #3
    Join Date
    Jan 1970
    Location
    Avoca Beach
    Posts
    14,150
    Total Downloaded
    0
    I have a set of Maxtrax on top of my camper trailer.

    I have only used them once on a Range Rover Club sand driving training day, when we had an Evoque come along, and it bellied out on the ruts at Stockton. Logically it was then used for the debogging exercise.

    There was a bit of a problem because the Evoque Highway tyres would not grab them unless they were right under the tyre but they worked well once positioned correctly.

    I think they are great , but I hope I never have to use them. The later Maxtrax have an accessory kit with spikes that go through holes to mount them to roofracks
    Regards Philip A

  4. #4
    Join Date
    Nov 2013
    Location
    gold coast
    Posts
    462
    Total Downloaded
    0
    Carpet
    Logs
    Hi tech= planks with tec screws screwed in so the heads can be used for traction
    My personal favorite is Blknights milk create ones though
    http://www.aulro.com/afvb/projects-t...-warnings.html

  5. #5
    Join Date
    Feb 2005
    Location
    Bracken Ridge - Brisbane - QLD
    Posts
    14,276
    Total Downloaded
    0
    I think you will find MAXTRAX are way better than treds.

    I have use my MAXTRAX to help two different cars that were having trouble in soft sand.....worked very well with zero damage to the MAXTRAX

    I have also used 4 MAXTRAX, one under each wheel to stop me sliding forward during winching on very slippery hard pack dirt surface. I was on a day out with the owner of MAXTRAX

    There are pros and cons with all version of recovery gear.

  6. #6
    Join Date
    Dec 2012
    Location
    Perth, WA
    Posts
    2,043
    Total Downloaded
    0
    Since you are in Perth. This mob are apparently good: FRP Non-Slip Mats for 4 Wheel Drive Vehicles - Grating FRP Australia.


    I have just moved down from Darwin and plan on getting some soon as there is plenty of sand here and where there is sand, there isn't much to winch off.


    It's cheaper to buy a whole sheet and cut it yourself if you have a few people wanting tracks so let me know if you want more.


    Happy Days

  7. #7
    Join Date
    Dec 2012
    Location
    Perth, WA
    Posts
    2,043
    Total Downloaded
    0
    Check out this mob:


    [ame]https://youtu.be/NLe71YjrUkI[/ame]

  8. #8
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,495
    Total Downloaded
    0
    carpets pretty good on sand too.
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.

  9. #9
    Join Date
    Jan 1970
    Location
    Avoca Beach
    Posts
    14,150
    Total Downloaded
    0
    The thing against the bridging ladders is they weigh a heap more than Maxtrax. One of the reasons I bought Maxtrax even though the bridging ladders are probably more useful as bridges for steps etc.
    Regards Philip A

  10. #10
    Join Date
    Feb 2005
    Location
    Bracken Ridge - Brisbane - QLD
    Posts
    14,276
    Total Downloaded
    0
    I have some FRP bridging ladder material.....agree they are heavier and defiantly need a set of glove to handle them.

    I used them once at cooma as a car ramp....carried them around for ages but never used.....dragged them to Moreton recently when k was wore about towing the camper, they get used.

Page 1 of 2 12 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!