-
26th October 2010, 01:24 PM
#1
Cleaned horn, now no longer working
Hi,
I cleaned my horn. Touched up the paint. Cleaned the inside.... but now Mr Lucas his horn stopped working.
I tried the setting screw to get the vibration going again. It does do that, but very poorly and no hoot coming out of it....
Anyone any advice?
Other horn refurbishers.... be warned. Better leave the inside alone if it is working.
-
26th October 2010, 09:09 PM
#2
Horn
Sounds like you have got it a little damp
dry it out in the oven at 60/65 C for a bout or so
clean the contact with a little piece of wet and dry
also clean the vibrating bit and the pole face
providing you have done nothing else
should work
cheers
ian
-
27th October 2010, 02:46 AM
#3
If no go give me a hoy, Ive got some spares
(REMLR 235/MVCA 9) 80" -'49.(RUST), -'50 & '52. (53-parts) 88" -57 s1, -'63 -s2a -GS x 2-"Horrie"-112-769, "Vet"-112-429(-Vietnam-PRE 1ATF '65) ('66, s2a-as UN CIVPOL), Hans '73- s3 109" '56 s1 x2
77- s3 van (gone)& '12- 110
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Search AULRO.com ONLY!
|
Search All the Web!
|
Bookmarks