Printable View
Mate you know I'm only a small bloke I'll have no trouble fitting behind the wheel, although I would want to be much taller. You should have come out today I could have used you to hold spanners for me. Gotta go and have that beerQuote:
Originally Posted by wattysan
Cheers Jeff
Spent some more time pulling bits of my 80, I now have down to just the firewall and running gear. I have also have uncovered the number stamped on the chassis, it is 1058 (stamped in big numbers ) then 16160306 (stamped in smaller numbers ). Should this be the same as the one on the firewall, because it is 06108390? The dismantling is trying at times with most bolts very hard to undo even with ample amounts of possum p applied and some left to soak for a couple of days. One of the big bolts that hold the firewall on is not budging at all , I think I'll have to get a longer spanner from work or a longer piece of pipe. Thats all for now, I'm off to have some medicinal beers.
Cheers Jeff
Hi Diana
A thought
narrow transom would be the one for that no. I would have thought
off to the Mother country for 12 weeks on wed.
anything I could bring back for you?
cheers
Ian
Quote:
Originally Posted by outback jeff
Looks like it's got a 51 chassis and 50 firewall. Will be interesting to see what gearbox number it has.
Quote:
Originally Posted by back_in
Bring back Princess Kate's sister for me .
Ok where do I find the gearbox number?Quote:
Originally Posted by LRO53
Cheers Jeff
All I could say to that would be
do you want me to Kill the millions in front of you
just to miss out myself
cheers
Ian
Well did have some good luck today. I was talking to one of the blokes that I work with today and he asked me if I had picked up my series 1, he thensaid that he had some old Landrover parts in his back shed and if I wanted them I could have them. About an hour or so later he walked into my office with this,
Attachment 36206
I could have kissed him as the one on mine has been butchered and I never thought I would be able to get the right one.
Then this afternoon the bloke across the road came over and told me that he has a trade in sheet metal work and has offered to fix any of the damaged pannels and that he has a mig and tig welder so any welding I need done just bring it over.
Time for a beer
Cheers Jeff
Nice one Jeff :D
Good old back_in gave me one for my car and wouldn't take anything for it! What a champ!
Cheers Charlie
On the RH side of the gearbox, just in front of the transfer case, and near the top of the main casting, stamped horizontally. It is on later ones anyway, but I expect it is on 80".Quote:
Originally Posted by outback jeff
It is not any cast numbers - these are casting or part numbers.
John
