Thread: 58 88' series 1 prop shaft

Ok I have a very worn front slip joint/splines on my front prop shaft. Can anyone help with some options/parts please...... Thanks Russell
ps I have got the uni's via one of my suppliers.

Probably helps you to know that the front prop shafts are the same on all 88 and 109 four cylinder Landrovers from Series 1 to 3.

Unfortunately the sliding joint is usually the bit that wears, but you may find one not too badly worn second hand. Otherwise you have the choice of getting it rebuilt - in NSW at least this must be done in an approved workshop - or getting a new one. Compare costs. Last time I did (for a 110 rear shaft) the cost of rebuilding was about twice the cost of a new genuine part. But this will vary between workshops and parts suppliers, so shop around.

Hope this helps,

John