
 Originally Posted by 
scrambler
					 
				 
				1. To go back a bit - a freewheel is what the drive hub of most road bicycles have, allowing drive to be applied in one direction only (forward) while the wheel can travel faster than the drive chain (or shaft in the case of a Series I).  
2. One implication not mentioned yet is that engine braking in an early Series I would only transmit to the rear wheels, making driving down a steep slope a rather interesting idea.
			
		 
	 
 1. Patented 1869, first mass produced 1898 by Ernst Sachs for use on bicycles. 
Free wheel units were commonly included to the rear of the gearbox in up-market cars, particularly from the UK, in the 1930s. This is because with free wheel, almost as soon as you disengage the clutch, the gearbox will stop rotating, enabling an easy, noiseless change to any gear without needing synchromesh - and the clutch engagement will be smooth as well, since the drive will not be taken up until the gearbox output shaft is going as fast as than the tailshaft. Rover was fitting freewheel units to their cars from 1932.
2. The freewheel lock was provided to enable front wheel engine braking as well as four wheel drive in reverse.
John
				
			 
			
		 
			
				
			
				
			
			
				John
JDNSW
1986 110 County 3.9 diesel
1970 2a 109 2.25 petrol
			
			
		 
	
Bookmarks