Page 26 of 38 FirstFirst ... 16242526272836 ... LastLast
Results 251 to 260 of 376

Thread: Shorty - my 1952 80' Series 1

  1. #251
    Join Date
    Feb 2008
    Posts
    375
    Total Downloaded
    0

    Painting

    Hi Troy
    after weeks of work.
    rubbing, priming, rubbing, priming, rubbing, priming etc etc etc etc etc
    and bog, bog, bog, bog etc etc etc etc etc
    you get the idea
    you will then spend 10 mins painting and will be pleased with the finish
    until you find the runs
    you will be like every one else
    you will try and rub then out long before they are dry
    make a mess
    wait and wait a little more
    they will rub out with a little 600 W and D
    then rub the finished job with 1200 W and D
    until the orange peel is nice a flat
    then out with the Cutting polish(Repo no 2)
    then (Repo no1) polish polish polish etc etc etc
    when finish sit down look at your handy work
    have a beer or 2
    cheers
    Ian

  2. #252
    olmate Guest
    Well people - today has been event full. First I come home and my little fella starts to walk. Not far ... but he walks
    So I have a couple of tubes (as you do) and then decide to throw some green paint around



    Very light first coat - shall rub them down tomorrow (pm) and then go again

  3. #253
    Join Date
    Nov 2007
    Location
    Cedar Grove SE QLD
    Posts
    776
    Total Downloaded
    0
    Looking good Troy, keep up the good work mate. Cant wait to see it when its all bolted back together.

  4. #254
    Join Date
    Feb 2008
    Posts
    375
    Total Downloaded
    0

    Painting

    Hi Troy
    looking good
    keep up the good work
    nice green
    cheers
    Ian

  5. #255
    olmate Guest
    Nothing done today (as I was painting bits of the house) but shall try to get some sanding done tomorrow and then a second coat.

  6. #256
    olmate Guest
    Have been too busy with other things and my time is not my own

    But I do have a question - Do I respray a second coat now onto Shorty or do I sand back with 600 Wet'n Dry first. (That's right - a spray painting numpty)

    I know Ian - you shall be shaking your head and I am sure that you have already told me but "its best to be safe" - aint it.....

  7. #257
    master chief Guest
    G,day Troy,
    Thats looking very nice.keep up the good work.
    I have the seat brackets and two seat backs,also one d type,
    I,ll send them down when i get back from Corowa.

    Regards
    Justin.

  8. #258
    olmate Guest
    Thanks Justin. Let me know what you want for them. I shall pm you with my address etc.

  9. #259
    Join Date
    Feb 2008
    Posts
    375
    Total Downloaded
    0

    Painting

    hi troy
    yes mate
    if you want a better finish rub it down with at a lest 600
    water (thinners)your last coat with a wet coat more thinners
    will give a shine off the gun
    cut the air down
    and pass the job a little slower so you put a wetter coat on
    be careful with runs
    put it on
    do not dry and put more on
    you will f......k up
    it is a learning curve
    try and try again
    cheers
    Ian

  10. #260
    olmate Guest
    Painting has had to wait for "yet another" weekend as I have had other things to do. Olmate has had its head off and I am replacing the valve stem seals whilst every spare moment has been spent around the home. One good thing has come of it tho as I get to drive the ol'mans 80" until I get olmate back on the road - thinking of that ... it may take a while now

Page 26 of 38 FirstFirst ... 16242526272836 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!