Check out Car Builder Solutions - NF Auto. One-stop Shop for Parts, Tools and Accessories for the Car Builder. Neil and Matt Foreman.. There'll be something in there that fits.
Peter
Hey guys,
I'm fitting a round smiths heater to my 2A and need a valve to control the coolant flow.What was originally fitted to do this?
The heater has 1/2" hose ends poking through the firewall.
Some pics would be great.
Cheers Eric
Check out Car Builder Solutions - NF Auto. One-stop Shop for Parts, Tools and Accessories for the Car Builder. Neil and Matt Foreman.. There'll be something in there that fits.
Peter
Any decent parts shop will have a catalogue of after market heater valves.
URSUSMAJOR
try Four Wheel Drives
they have a pretty good catalog available for download. They may have one in there
The original stood a couple of inches high on the head, with a screw down control on top, side outlet. No remote operation.
John
John
JDNSW
1986 110 County 3.9 diesel
1970 2a 109 2.25 petrol
Heater valve part no. 269562
![]()
You can also mount it at the front of the head, which is where mine is. Mine has a broad flat lever handle instead of a wheel![]()
If you find out what the thread is in the head - probably 1/2" BSP - you can check out the taps in the plumbing section of a hardware store.
I found one for my S1, which is the wheel type, for $12
Cheers Charlie
This might help as there is no original remote operated valve.
See second post
http://www.aulro.com/afvb/technical-...ypass-lpg.html
REMLR 243
2007 Range Rover Sport TDV6
1977 FC 101
1976 Jaguar XJ12C
1973 Haflinger AP700
1971 Jaguar V12 E-Type Series 3 Roadster
1957 Series 1 88"
1957 Series 1 88" Station Wagon
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks