Results 1 to 8 of 8

Thread: side step query

  1. #1
    Join Date
    Jan 2014
    Location
    Googong
    Posts
    73
    Total Downloaded
    0

    side step query

    I've been lucky enough to purchase 2 original side steps for my SIIA - see attached photo. They need a fair bit of de-rusting and painting and I will need to track down the rubber mat for them.


    But I've a query. How are they fitted and more importantly where does that 30 cm long brace go? My early parts manual and my work shop manual shed no light at all.


    If anyone has photos of a side step installed, especially from underneath, I would really appreciate it.


    Cheers


    Nic
    Attached Images Attached Images

  2. #2
    Join Date
    Jan 1970
    Location
    Narre Warren South
    Posts
    6,795
    Total Downloaded
    0
    Not a great photo (limited access and it's getting dark).
    This is on the passenger side looking from the front.




    I wonder if Paddocks can supply just the rubber ?
    PM416 | Side Step (folding) with rubber treadplate - RH - all 88in and 109 front fill


    Colin
    '56 Series 1 with homemade welder
    '65 Series IIa Dormobile
    '70 SIIa GS
    '76 SIII 88" (Isuzu C240)
    '81 SIII FFR
    '95 Defender Tanami
    Motorcycles :-
    Vincent Rapide, Panther M100, Norton BIG4, Electra & Navigator, Matchless G80C, Suzuki SV650

  3. #3
    Join Date
    Jan 2014
    Location
    Googong
    Posts
    73
    Total Downloaded
    0
    Thanks Colin. That is very useful.

    Cheers

    Nic

  4. #4
    JDNSW's Avatar
    JDNSW is offline RoverLord Silver Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    29,510
    Total Downloaded
    0
    I will see if I can get a photo in the morning (if it has stopped raining), but it will not help with the long stay, as I have both Left and right tanks.

    When the rubber gave up i replaced it with alloy treadplate,

    John
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol

  5. #5
    Join Date
    Jan 2014
    Location
    Googong
    Posts
    73
    Total Downloaded
    0
    I've found that Craddocks can supply the rubber mat - part number 517977 along with the rivets that are needed to fit it. Craddocks assure me that the replacement rubber mat fits original side steps - so I'll be ordering some soon.


    Nic

  6. #6
    Join Date
    Jan 2014
    Location
    Googong
    Posts
    73
    Total Downloaded
    0
    I've been crawling around under my SIIA trying to figure out exactly what the side steps get attached to. I'm guessing the side step bracket gets bolted to the U shaped sill channel and presumably one side of the side step bracket gets bolted via the bolt that also holds the securing bracket for the sill. Can anyone confirm this please. A photo showing the side step in relation to the door hinge would be an enormous help.


    The 2 side steps came with only 1 small L shaped bracket (left in the photo). I'm guessing this gets attached to the chassis outrigger and then the 30 cm long support bracket gets bolted to that (right in photo). Is this correct? If so I'll need to get another small bracket fabricated.


    Thanks for your help.


    Cheers


    Nic
    Attached Images Attached Images

  7. #7
    JDNSW's Avatar
    JDNSW is offline RoverLord Silver Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    29,510
    Total Downloaded
    0
    See if this helps.

    John
    Attached Images Attached Images
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol

  8. #8
    Join Date
    Jan 2014
    Location
    Googong
    Posts
    73
    Total Downloaded
    0
    Thanks John. I can now see where they go.


    Cheers


    Nic

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!