I don't think that is the correct shroud, and I don't recognise it - perhaps off a six?
I have a spare, but I have no intention of shipping it to Victoria. On the other hand, if you happen to be at the Sydney Expo next month......
John
Hi All,
I am restoring a 1960 Series II - and I believe that I have a standard radiator (which I have had re-cored).
Today whilst attempting to fit the shroud - I came across a problem.
I think that I have the incorrect shroud for my radiator.
My shroud has one "flat" side (on the passengers side) - that the 5 x screws go through and screw into the back of the radiator.
However on the other side (the drivers side/battery box side) of the shroud - there is a 90 degree bend at the edge of the shroud, which means that the screws would need to screw into the side of the radiator support panel (instead of the back).
Which is completely different to the passenger side. Looking at the actual radiator - I believe that both sides of the shroud need to be "flat". This is based on the fact that the radiator (on both sides) has the 5 x screw holes on the back of the radiator, not on the side..
Here is the Passenger side of the shroud:
Here is the Drivers side of the shroud - note the 90 degree bend:
Not only do I have an issue with the drivers side 90 degree bend on the shroud - which I think should be flat (0 degree). BUT the shroud appears to need to be off-set - as I could not reinstall the fan blades...
So the questions that I have are:
* Have I got the wrong fan shroud (eg - from a different Series vehicle) ?
* Can I get the correct shroud ?
Series II, 1960, 2.25 4cyl standard engine...
Any help is greatly appreciated!!!
Cheers,
The Grey Ghost
88 Perentie FFR - Club Rego
93 Discovery 1 200 Tdi - Club Rego
03 130 Td5 Single Cab
06 Discovery 3 Petrol
22 Defender 90 - Full rego
I don't think that is the correct shroud, and I don't recognise it - perhaps off a six?
I have a spare, but I have no intention of shipping it to Victoria. On the other hand, if you happen to be at the Sydney Expo next month......
John
John
JDNSW
1986 110 County 3.9 diesel
1970 2a 109 2.25 petrol
Series Landy Rescue
Parts, welding, finger folding, Storage, Painting, Fabrication, Restorations,
Our FB Page..
https://www.facebook.com/SeriesLR?ref=bookmarks
'51 80", Discovery 2, Defender 130, 101 FC + 20 other Land Rover vehicles
I think we may be visiting you on our excursion up north.
If you could collect the shroud from John, please. I can pass it on to Tom.
All sorted GG?
Hi John,
Is the below ok? Can I please have that shroud if it's still available? It will finish off my restoration nicely...
Mick/HH's - wow you guys have done an Aulro courier service on auto pilot. Thanks guys - LEGENDS!!!
John?
Cheers,
Grey Ghost
88 Perentie FFR - Club Rego
93 Discovery 1 200 Tdi - Club Rego
03 130 Td5 Single Cab
06 Discovery 3 Petrol
22 Defender 90 - Full rego
Series Landy Rescue
Parts, welding, finger folding, Storage, Painting, Fabrication, Restorations,
Our FB Page..
https://www.facebook.com/SeriesLR?ref=bookmarks
'51 80", Discovery 2, Defender 130, 101 FC + 20 other Land Rover vehicles
Series Landy Rescue
Parts, welding, finger folding, Storage, Painting, Fabrication, Restorations,
Our FB Page..
https://www.facebook.com/SeriesLR?ref=bookmarks
'51 80", Discovery 2, Defender 130, 101 FC + 20 other Land Rover vehicles
| Search AULRO.com ONLY! | Search All the Web! | 
|---|
|  |  | 
Bookmarks