Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Radiator Shroud

  1. #1
    Join Date
    Apr 2011
    Location
    Wandong,Victoria,Australia
    Posts
    3,379
    Total Downloaded
    0

    Radiator Shroud

    Hi All,

    I am restoring a 1960 Series II - and I believe that I have a standard radiator (which I have had re-cored).

    Today whilst attempting to fit the shroud - I came across a problem.

    I think that I have the incorrect shroud for my radiator.

    My shroud has one "flat" side (on the passengers side) - that the 5 x screws go through and screw into the back of the radiator.

    However on the other side (the drivers side/battery box side) of the shroud - there is a 90 degree bend at the edge of the shroud, which means that the screws would need to screw into the side of the radiator support panel (instead of the back).

    Which is completely different to the passenger side. Looking at the actual radiator - I believe that both sides of the shroud need to be "flat". This is based on the fact that the radiator (on both sides) has the 5 x screw holes on the back of the radiator, not on the side..

    Here is the Passenger side of the shroud:


    Here is the Drivers side of the shroud - note the 90 degree bend:


    Not only do I have an issue with the drivers side 90 degree bend on the shroud - which I think should be flat (0 degree). BUT the shroud appears to need to be off-set - as I could not reinstall the fan blades...

    So the questions that I have are:

    * Have I got the wrong fan shroud (eg - from a different Series vehicle) ?
    * Can I get the correct shroud ?

    Series II, 1960, 2.25 4cyl standard engine...

    Any help is greatly appreciated!!!

    Cheers,
    The Grey Ghost
    88 Perentie FFR - Club Rego
    93 Discovery 1 200 Tdi - Club Rego
    03 130 Td5 Single Cab
    06 Discovery 3 Petrol
    22 Defender 90 - Full rego

  2. #2
    JDNSW's Avatar
    JDNSW is offline RoverLord Silver Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    29,510
    Total Downloaded
    0
    I don't think that is the correct shroud, and I don't recognise it - perhaps off a six?

    I have a spare, but I have no intention of shipping it to Victoria. On the other hand, if you happen to be at the Sydney Expo next month......

    John
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol

  3. #3
    Join Date
    Nov 2009
    Location
    Western Victoria
    Posts
    14,101
    Total Downloaded
    0
    Quote Originally Posted by JDNSW View Post
    I don't think that is the correct shroud, and I don't recognise it - perhaps off a six?

    I have a spare, but I have no intention of shipping it to Victoria. On the other hand, if you happen to be at the Sydney Expo next month......

    John
    Any way of getting someone at the expo, who will also be at Glenreagh, to pass it on?

  4. #4
    Join Date
    Jan 2007
    Location
    Logan Village area S.E. QLD
    Posts
    17,686
    Total Downloaded
    0
    Quote Originally Posted by Mick_Marsh View Post
    Any way of getting someone at the expo, who will also be at Glenreagh, to pass it on?
    We are at the Sydney expo and Glenreagh

    Mrs hh
    Series Landy Rescue

    Parts, welding, finger folding, Storage, Painting, Fabrication, Restorations,
    Our FB Page..
    https://www.facebook.com/SeriesLR?ref=bookmarks

    '51 80", Discovery 2, Defender 130, 101 FC + 20 other Land Rover vehicles

  5. #5
    Join Date
    Nov 2009
    Location
    Western Victoria
    Posts
    14,101
    Total Downloaded
    0
    I think we may be visiting you on our excursion up north.
    If you could collect the shroud from John, please. I can pass it on to Tom.

    All sorted GG?

  6. #6
    Join Date
    Apr 2011
    Location
    Wandong,Victoria,Australia
    Posts
    3,379
    Total Downloaded
    0
    Hi John,

    Is the below ok? Can I please have that shroud if it's still available? It will finish off my restoration nicely...

    Mick/HH's - wow you guys have done an Aulro courier service on auto pilot. Thanks guys - LEGENDS!!!

    John?

    Cheers,
    Grey Ghost
    88 Perentie FFR - Club Rego
    93 Discovery 1 200 Tdi - Club Rego
    03 130 Td5 Single Cab
    06 Discovery 3 Petrol
    22 Defender 90 - Full rego

  7. #7
    Join Date
    Jan 2007
    Location
    Logan Village area S.E. QLD
    Posts
    17,686
    Total Downloaded
    0
    Quote Originally Posted by Mick_Marsh View Post
    I think we may be visiting you on our excursion up north.
    If you could collect the shroud from John, please. I can pass it on to Tom.

    All sorted GG?
    PS you haven't sent a form in yet for Glenreagh?? So you are not accounted for, yet


    Mrs hh
    Series Landy Rescue

    Parts, welding, finger folding, Storage, Painting, Fabrication, Restorations,
    Our FB Page..
    https://www.facebook.com/SeriesLR?ref=bookmarks

    '51 80", Discovery 2, Defender 130, 101 FC + 20 other Land Rover vehicles

  8. #8
    Join Date
    Jan 2007
    Location
    Logan Village area S.E. QLD
    Posts
    17,686
    Total Downloaded
    0
    Quote Originally Posted by grey_ghost View Post
    Hi John,

    Is the below ok? Can I please have that shroud if it's still available? It will finish off my restoration nicely...

    Mick/HH's - wow you guys have done an Aulro courier service on auto pilot. Thanks guys - LEGENDS!!!

    John?

    Cheers,
    Grey Ghost
    Don't worry we will see John. We are both regulars at the expo

    Mrs hh
    Series Landy Rescue

    Parts, welding, finger folding, Storage, Painting, Fabrication, Restorations,
    Our FB Page..
    https://www.facebook.com/SeriesLR?ref=bookmarks

    '51 80", Discovery 2, Defender 130, 101 FC + 20 other Land Rover vehicles

  9. #9
    alien's Avatar
    alien is offline A Keeper of the TGO Silver Subscriber
    Join Date
    Jun 2009
    Location
    Bacchus Marsh Vic.
    Posts
    3,337
    Total Downloaded
    0
    Quote Originally Posted by The ho har's View Post
    PS you haven't sent a form in yet for Glenreagh?? So you are not accounted for, yet


    Mrs hh
    You'll have to forgive my traveling partner.
    He's slowed up a bit now he spends so much time in SA.
    A decade and 30mins. is a lot to catch up on when he returns
    Cheers, Kyle



    The Good Oil.
    When did you last visit?
    http://www.aulro.com/afvb/good-oil/



  10. #10
    Join Date
    Nov 2009
    Location
    Western Victoria
    Posts
    14,101
    Total Downloaded
    0
    Quote Originally Posted by alien View Post
    You'll have to forgive my traveling partner.
    He's slowed up a bit now he spends so much time in SA.
    A decade and 30mins. is a lot to catch up on when he returns
    Mrs HH, you will be seeing it about ten years ago.

Page 1 of 2 12 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!