Thread: Spare wheel bonnet rubbers - trying to locate

Hello from Brisbane.

I bought a set of the NOS bonnet rubbers from the UK a year or so back - unfortunately, I can't remember which one of the usual suspects was the supply source now. Likely one of either Craddocks, LR Direct or Dunsfold.

Not sure this is heaps of help, but hope you can track a set down. Googling the part number and a bit of perseverance usually wins the day for most parts.

Cheers

Damian,
You need either deep pockets or access to a wood turning lathe.

Rubber buffers

I made some for mine but they don't look as neat as properly moulded ones.

Colin

Finding the round ones for the later cars are pretty easy as per the link below. The challenge would be to find the rectangular ones of the early cars. I would be grateful if anyone knows where to get those...


SET of 4 - Land Rover Series Bonnet Spare Wheel Buffers - MRC5627 / 336473 | eBay


Cheers,

Lou

Oh well. "In for a penny . . . " Colin.

Not sure why my flea bay search didn't turn those up.

Originally Posted by damiane

Not sure why my flea bay search didn't turn those up.

I've worked out that e-bay searches are very similar to finding something in a military Q-Store...

Example would be if you wanted a pair of standard air-force uniform shoes to ask the quarter master for: - Shoes, men's, black, laced, rubber soled, drill... If you leave any bit out the standard answer would be that there is none in stores!

Following the same concept has made e-bay searches a lot more effective.

Cheers,

Lou

Hello again.

Still not of much use to you, but I had also seen those alternative posts and, while the NOS part is genuinely scarce, I am pretty sure that I didn't pay anything within a bull's roar of GBP50 for the 4 mounting rubbers.

If I happen to come across the invoices in the deep litter pile I will let you know the who from and for how much that was involved.

Incidentally, particularly with a wheel in place and based on my own vehicles over many years, the originals can last indefinitely. Being so, you might canvass a few of the local AULRO parts hoarders to see if they have some on a wreck. The Ho Hars at Buccan are one option that comes to mind.

Cheers,

Almost 60 years in the outback sun has left my rubbers looking like they've been in a house fire.

I'd be grateful for any leads on a set of the Series 1 style rectangular ones as fitted to my very early Series II.

Cheers,

Lou

Originally Posted by Loubrey

Almost 60 years in the outback sun has left my rubbers looking like they've been in a house fire.

I'd be grateful for any leads on a set of the Series 1 style rectangular ones as fitted to my very early Series II.

Cheers,

Lou

I'm sure years back someone on AULRO made some. Bonded some rubber together & belt sanded them to shape.

I did enquire with a company about making them (and the round ones). Problem was the cost of the tooling and minimum quantity needed.
Can't be in big demand otherwise **itpart would be producing them.....


Colin