- 
	
	
	
		Series 2 intro 
		Well as with oneoff was also removing steering relay so can repair front well it had been soaking for days with pressure on it and it finally gave up its hold  I am glad I removed it now as the tube had half rusted away and requires repair https://www.aulro.com/afvb/images/im...016/12/154.jpghttps://www.aulro.com/afvb/images/im...016/12/155.jpg 
 
- 
	
	
	
		Series 2 intro 
		Stripped down steering relay at work today housing has hairline crack shaft gone so it's a bin job for that one 
 so is genuine definitely the go or are the beamach relays ok
 
 
- 
	
	
	
	
		There was a NOS steering relay on Ebay (US) last week in excess of $500.
 At that price a Bearmach one is definitely acceptable.
 
 
- 
	
	
	
	
		Got little bit more done over last week dumb iron rust cut out and radiator surround mount on front chassis refitted. 
 https://www.aulro.com/afvb/images/im...017/01/928.jpghttps://www.aulro.com/afvb/images/im...017/01/929.jpg
 
 
- 
	
	
	
		Series 2 intro 
		Decided to have a crack at the steering relay tube today getting the last half of old tube out was a bit of a challenge but all out nicely 
 New tube fitted tight into the what you would call a strengthening ring at the bottom inside of chassis were the locating ring for relay bolts to on the crossmember
 All welded in and done https://www.aulro.com/afvb/images/im...017/01/726.jpg
 
 
- 
	
	
	
	
		Just noticed this number painted on chassis in white grey paint would it have been the employee number who built it https://www.aulro.com/afvb/images/im...017/01/699.jpg 
 
- 
	
	
	
	
- 
	
	
	
	
		Finally after 7 months of searching I found and it got here today from Nsw a series 2 2.25 engine going by the engine number a late 59 model as engine number is 151991987 
 so close as I am going to get to a 1960 it has been in a series 3 so will need to remove a few items
 I have swan neck exhaust manifold c39 generator solex  etc etc ready for it so will look as close as possible to as it was built
 
 https://www.aulro.com/afvb/images/im...017/01/339.jpg
 
 
- 
	
	
	
		Series 2 intro 
		Not sure what happened to my previous post but redid it
 
 Haven't had much time to work on the old girl lately so just cleaned up and primered the air cleaner and mount
 
 https://www.aulro.com/afvb/images/im...017/02/248.jpg
 
 https://www.aulro.com/afvb/images/im...017/02/249.jpg
 
 
- 
	
	
	
	
		I had a hour or two spare this afternoon so had a go at the cracks in the left hand rear outrigger also found another 76 in grey/white painted on it , same as what on rear crossmember https://www.aulro.com/afvb/images/im...017/02/175.jpghttps://www.aulro.com/afvb/images/im...017/02/176.jpghttps://www.aulro.com/afvb/images/im...017/02/177.jpg