Thread: My 2A Shorty

So I spent some time under the beast cleaning what looked like 2 inches of grease oil mud sand and anything else I found..
I then noticed there was no transfer case filler plug ...missing...
Anyone know if it's the same as any of the other rover gearboxes?
Not urgent but I need to know..
Ta
Brad

A BSP plug available at any plumbing or hardware store.


Cheers, Mick.

Originally Posted by 67hardtop

You seem to have some sort of different rear name plate there on the back there. Looks as if its non standard fitment. Where can i get on from????
😈😈😈

Cheers Rod😆

Sent from my GT-I9507 using AULRO mobile app

Perhaps you can see the nameplate better in this image?

Thats better but ur supposed to have one name plate on the front and one on the back not two on the back. Looks like double trouble but twice the fun....
Jealous😟😟 here

Cheers Rod 😎
Sent from my GT-I9507 using AULRO mobile app

I have one on the front

Now ur just showing off....dammit😆😆

Cheers Rod

Sent from my GT-I9507 using AULRO mobile app

Originally Posted by Bradtot

So I spent some time under the beast cleaning what looked like 2 inches of grease oil mud sand and anything else I found..
I then noticed there was no transfer case filler plug ...missing...
Anyone know if it's the same as any of the other rover gearboxes?
Not urgent but I need to know..
Ta
Brad

if there was no filler plug, is there any oil in the t/case?

Dunno haven't had a chance to check ....motor don't run, headlights come on when I connect battery ....light switch has no affect. Wipers don't work starter motor tries to turn over motor very slowly, all in all I have lots to sort out before I even try and see what really needs to be done.
One thing is my door handles ....door catch. I have a button you push to open the doors not a handle you pull up.This is on the outside, on the inside I have a chrome lever to pull up
I can't find any info of the door mechanism I have.
Any clues?
I will post a picture on the weekend.
Brad